CarBahn Performance Controller (CPC):

The CPC is a plug and play ECU that increases boost pressure in turbocharged cars to dramatically increase HP and Torque. The unit has selectable maps through a Bluetooth app on your smart phone.

You can download these apps for your smartphone through the Apple App Store and the Google Play Store.

 

These maps are designed to accommodate different octane fuels for additional increased performance. You can choose between 91, 93 and 100 Octane.

As with all CarBahn products an optional powertrain warranty can be purchased.

If you want to trade your CarBahn Performance Controller in for software in the future, there is a $500 upgrade fee and if you purchased the warranty, it is transferable to the software at no additional charge!

 

Doing it yourself:

A note on self-tuning tools. There are now programs available that you can buy to tune your car yourself. Many of these tools come with canned programs. Be careful as tuning a high output engine requires tremendous knowledge and experience to extract maximum power without damage.

Emissions legality:

A note on down pipes (removing the catalyst). We have run back-to-back dyno runs with the cat on and off and the power gain is much smaller than most people claim usually around 11hp. We all need to breathe the air. It is difficult to get your car its required emissions test without catalyst and it is illegal.

High boost with stock engine:

We have seen many damaged engines as result of making too much power with a stock engine. While modern engines are very reliable, it is easy to add large turbochargers and water methanol injection and break the engine. On the F9X, maximum safe power on a stock engine is 800 lb-ft flywheel torque. CarBahn makes high performance engines designed to handle more power. More information is available on this web site.

About Steve Dinan: 

Steve Dinan has over 40 years of streetcar tuning experience. As an engine supplier we won 3 prototype racing championships and two overall wins at the 24hrs of Daytona partnering with Chip Ganassi Racing. No one knows more about tuning high performance engines than Steve Dinan.

Warranty Information:

*Registration with CarBahn Autoworks at time of purchase is required to maintain matching warranty coverage. CarBahn Autoworks reserves the right to deny warranty program enrollment under certain conditions. Please contact us prior to purchase if you have any questions.

 

*Warranty valid on U.S. and Canadian specification vehicles only. If your vehicle is currently covered by the vehicle manufacturer’s new car limited warranty, CarBahn Autoworks’ products are warranted for the remaining term of the vehicle manufacturer’s new car limited warranty. The manufacturer’s new car warranty is limited to 4 years or 50,000 miles (80,000 kilometers in Canada), commencing on the date of first retail sale or the date the vehicle is first placed in-service as a demonstrator or company vehicle, whichever is earlier. CarBahn Autoworks’ warranties are transferable when ownership of the vehicle into which the CarBahn Autoworks products were originally installed is sold. The warranty will, without charge for parts or labor, repair or replace the defective CarBahn Autoworks’ component(s), as well as any original vehicle manufacturer’s component(s) that may have been directly affected by a CarBahn Autoworks component, using new or authorized remanufactured parts. The decision to repair or replace said parts is at the sole discretion of CarBahn Autoworks. Parts for which replacements are supplied under this limited warranty become the property of CarBahn Autoworks. In all cases, a reasonable period must be allowed for warranty repairs to be completed.

If your vehicle is outside of the vehicle manufacturer’s new car limited warranty, for two (2) years from the original purchase date of the CarBahn Autoworks product, CarBahn Autoworks will repair or replace, at its sole discretion, any defective CarBahn Autoworks component. This warranty does not include reimbursement for repairs to any original vehicle manufacturer’s component(s) that may have been affected by a CarBahn Autoworks component.

 

*Warranty exclusions:

Return shipping charges, towing charges, rental car fees damage to a component or assembly due to the installation of replacement parts with specifications that differ in any material respect from the original vehicle manufacturer’s or CarBahn Autoworks parts, damage resulting from the unauthorized modification of a CarBahn Autoworks part or assembly, damage resulting from the use of other manufacturer’s products in conjunction with CarBahn Autoworks’ products or systems, damage to the clutch due to power shifting or abuse, brake rotor warp, friction materials, maintenance services and parts when replaced during maintenance such as spark plugs, lubricants, fluids, engine tune-up parts, replacement of filters, coolant and refrigerant, mechanical adjustments or repairs which result from normal wear and tear, drive-belts, light bulbs, damage due to the failure to perform maintenance services at the specified intervals or in accordance with the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn Autoworks’ product instructions, damage attributable to negligence or abuse, improper installation, improper treatment or treatment contrary to the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn Autoworks’ product instructions, engine damage resulting from alteration of CarBahn Autoworks’ original boost pressure, damage resulting from the use of improper or contaminated fuel, damage occurring through corrosion resulting from weak or improper coolant, damage to a CarBahn Autoworks component as a result of a collision or improper collision damage repairs, any vehicle operated in any competitive event or subjected to aggressive track conditions, custom-designed competition parts, damages resulting from loss of time, inconvenience or loss of the use of the vehicle, damage resulting from environmental influences, flood, accident, fire damage, or road salt corrosion, re-manufactured or refurbished products or components (these products are clearly identified as re-furbished and are warranted for the period specified for that particular product).

CarBahn Performance Controller (CPC):

The CPC is a plug and play ECU that increases boost pressure in turbocharged cars to dramatically increase HP and Torque. The unit has selectable maps through a Bluetooth app on your smart phone.

You can download these apps for your smartphone through the Apple App Store and the Google Play Store.

 

These maps are designed to accommodate different octane fuels for additional increased performance. You can choose between 91, 93 and 100 Octane.

As with all CarBahn products an optional powertrain warranty can be purchased.

If you want to trade your CarBahn Performance Controller in for software in the future, there is a $500 upgrade fee and if you purchased the warranty, it is transferable to the software at no additional charge!

 

Doing it yourself:

A note on self-tuning tools. There are now programs available that you can buy to tune your car yourself. Many of these tools come with canned programs. Be careful as tuning a high output engine requires tremendous knowledge and experience to extract maximum power without damage.

Emissions legality:

A note on down pipes (removing the catalyst). We have run back-to-back dyno runs with the cat on and off and the power gain is much smaller than most people claim usually around 11hp. We all need to breathe the air. It is difficult to get your car its required emissions test without catalyst and it is illegal.

High boost with stock engine:

We have seen many damaged engines as result of making too much power with a stock engine. While modern engines are very reliable, it is easy to add large turbochargers and water methanol injection and break the engine. On the F9X, maximum safe power on a stock engine is 800 lb-ft flywheel torque. CarBahn makes high performance engines designed to handle more power. More information is available on this web site.

About Steve Dinan: 

Steve Dinan has over 40 years of streetcar tuning experience. As an engine supplier we won 3 prototype racing championships and two overall wins at the 24hrs of Daytona partnering with Chip Ganassi Racing. No one knows more about tuning high performance engines than Steve Dinan.

Warranty Information:

*Registration with CarBahn Autoworks at time of purchase is required to maintain matching warranty coverage. CarBahn Autoworks reserves the right to deny warranty program enrollment under certain conditions. Please contact us prior to purchase if you have any questions.

 

*Warranty valid on U.S. and Canadian specification vehicles only. If your vehicle is currently covered by the vehicle manufacturer’s new car limited warranty, CarBahn Autoworks’ products are warranted for the remaining term of the vehicle manufacturer’s new car limited warranty. The manufacturer’s new car warranty is limited to 4 years or 50,000 miles (80,000 kilometers in Canada), commencing on the date of first retail sale or the date the vehicle is first placed in-service as a demonstrator or company vehicle, whichever is earlier. CarBahn Autoworks’ warranties are transferable when ownership of the vehicle into which the CarBahn Autoworks products were originally installed is sold. The warranty will, without charge for parts or labor, repair or replace the defective CarBahn Autoworks’ component(s), as well as any original vehicle manufacturer’s component(s) that may have been directly affected by a CarBahn Autoworks component, using new or authorized remanufactured parts. The decision to repair or replace said parts is at the sole discretion of CarBahn Autoworks. Parts for which replacements are supplied under this limited warranty become the property of CarBahn Autoworks. In all cases, a reasonable period must be allowed for warranty repairs to be completed.

If your vehicle is outside of the vehicle manufacturer’s new car limited warranty, for two (2) years from the original purchase date of the CarBahn Autoworks product, CarBahn Autoworks will repair or replace, at its sole discretion, any defective CarBahn Autoworks component. This warranty does not include reimbursement for repairs to any original vehicle manufacturer’s component(s) that may have been affected by a CarBahn Autoworks component.

 

*Warranty exclusions:

Return shipping charges, towing charges, rental car fees damage to a component or assembly due to the installation of replacement parts with specifications that differ in any material respect from the original vehicle manufacturer’s or CarBahn Autoworks parts, damage resulting from the unauthorized modification of a CarBahn Autoworks part or assembly, damage resulting from the use of other manufacturer’s products in conjunction with CarBahn Autoworks’ products or systems, damage to the clutch due to power shifting or abuse, brake rotor warp, friction materials, maintenance services and parts when replaced during maintenance such as spark plugs, lubricants, fluids, engine tune-up parts, replacement of filters, coolant and refrigerant, mechanical adjustments or repairs which result from normal wear and tear, drive-belts, light bulbs, damage due to the failure to perform maintenance services at the specified intervals or in accordance with the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn Autoworks’ product instructions, damage attributable to negligence or abuse, improper installation, improper treatment or treatment contrary to the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn Autoworks’ product instructions, engine damage resulting from alteration of CarBahn Autoworks’ original boost pressure, damage resulting from the use of improper or contaminated fuel, damage occurring through corrosion resulting from weak or improper coolant, damage to a CarBahn Autoworks component as a result of a collision or improper collision damage repairs, any vehicle operated in any competitive event or subjected to aggressive track conditions, custom-designed competition parts, damages resulting from loss of time, inconvenience or loss of the use of the vehicle, damage resulting from environmental influences, flood, accident, fire damage, or road salt corrosion, re-manufactured or refurbished products or components (these products are clearly identified as re-furbished and are warranted for the period specified for that particular product).

 

CarBahn Performance Controller (CPC):

The CPC is a plug and play ECU that increases boost pressure in turbocharged cars to dramatically increase HP and Torque. The unit has selectable maps through a Bluetooth app on your smart phone.

You can download these apps for your smartphone through the Apple App Store and the Google Play Store.

 

These maps are designed to accommodate different octane fuels for additional increased performance. You can choose between 91, 93 and 100 Octane.

As with all CarBahn products an optional powertrain warranty can be purchased.

If you want to trade your CarBahn Performance Controller in for software in the future, there is a $250 upgrade fee and if you purchased the warranty, it is transferable to the software at no additional charge! 

 

Heat Exchanger

CarBahn heat exchanger very efficient additional heat exchangers are tied into the intercooler heat exchanger circuit to extract more heat from the intercoolers. They are designed to compensate for additional heat generated by increased boost. The reduced in temperature is a must to extract maximum power and ensure reliability of the engine with High boost applications. In addition, they are very light weight compared to other units on the market. This is important to maintain proper weight distribution since they are mounted on the nose of the car.

 

Emissions legality:

A note on down pipes (removing the catalyst). We have run back-to-back dyno runs with the cat on and off and the power gain is much smaller than most people claim usually around 11hp. We all need to breathe the air. It is difficult to get your car its required emissions test without catalyst and it is illegal.

 

About Steve Dinan: 

Steve Dinan has over 40 years of streetcar tuning experience. As an engine supplier we won 3 prototype racing championships and two overall wins at the 24hrs of Daytona partnering with Chip Ganassi Racing. No one know more about tuning high performance engines than Steve Dinan.

 

Warranty Information:

*Registration with CarBahn Autoworks at time of purchase is required to maintain matching warranty coverage. CarBahn Autoworks reserves the right to deny warranty program enrollment under certain conditions. Please contact us prior to purchase if you have any questions.

*Warranty valid on U.S. and Canadian specification vehicles only. If your vehicle is currently covered by the vehicle manufacturer’s new car limited warranty, CarBahn Autoworks’ products are warranted for the remaining term of the vehicle manufacturer’s new car limited warranty. The manufacturer’s new car warranty is limited to 4 years or 50,000 miles (80,000 kilometers in Canada), commencing on the date of first retail sale or the date the vehicle is first placed in-service as a demonstrator or company vehicle, whichever is earlier. CarBahn Autoworks’ warranties are transferable when ownership of the vehicle into which the CarBahn Autoworks products were originally installed is sold. The warranty will, without charge for parts or labor, repair or replace the defective CarBahn Autoworks’ component(s), as well as any original vehicle manufacturer’s component(s) that may have been directly affected by a CarBahn Autoworks component, using new or authorized remanufactured parts. The decision to repair or replace said parts is at the sole discretion of CarBahn Autoworks. Parts for which replacements are supplied under this limited warranty become the property of CarBahn Autoworks. In all cases, a reasonable period must be allowed for warranty repairs to be completed.

If your vehicle is outside of the vehicle manufacturer’s new car limited warranty, for two (2) years from the original purchase date of the CarBahn Autoworks product, CarBahn Autoworks will repair or replace, at its sole discretion, any defective CarBahn Autoworks component. This warranty does not include reimbursement for repairs to any original vehicle manufacturer’s component(s) that may have been affected by a CarBahn Autoworks component.

*Warranty exclusions:

Return shipping charges, towing charges, rental car fees damage to a component or assembly due to the installation of replacement parts with specifications that differ in any material respect from the original vehicle manufacturer’s or CarBahn Autoworks parts, damage resulting from the unauthorized modification of a CarBahn Autoworks part or assembly, damage resulting from the use of other manufacturer’s products in conjunction with CarBahn Autoworks’ products or systems, damage to the clutch due to power shifting or abuse, brake rotor warp, friction materials, maintenance services and parts when replaced during maintenance such as spark plugs, lubricants, fluids, engine tune-up parts, replacement of filters, coolant and refrigerant, mechanical adjustments or repairs which result from normal wear and tear, drive-belts, light bulbs, damage due to the failure to perform maintenance services at the specified intervals or in accordance with the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn Autoworks’ product instructions, damage attributable to negligence or abuse, improper installation, improper treatment or treatment contrary to the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn Autoworks’ product instructions, engine damage resulting from alteration of CarBahn Autoworks’ original boost pressure, damage resulting from the use of improper or contaminated fuel, damage occurring through corrosion resulting from weak or improper coolant, damage to a CarBahn Autoworks component as a result of a collision or improper collision damage repairs, any vehicle operated in any competitive event or subjected to aggressive track conditions, custom-designed competition parts, damages resulting from loss of time, inconvenience or loss of the use of the vehicle, damage resulting from environmental influences, flood, accident, fire damage, or road salt corrosion, re-manufactured or refurbished products or components (these products are clearly identified as re-furbished and are warranted for the period specified for that particular product).

 

 

 

• 2 – 3.5 Bar MAP Sensors
• Includes Competition Models

Philosophy:

CarBahn has successfully engineered and manufactured the industry’s largest and most thermally efficient Heat Exchanger. By employing innovative design techniques, CarBahn has achieved a remarkable 40% increase in cooling capacity compared to existing Heat Exchangers in the market. Drawing inspiration from Formula 1 Heat Exchanger technology, CarBahn has integrated high-performance features and optimized flow dynamics to ensure unparalleled heat transfer efficiency.In addition to its superior thermal performance, CarBahn’s race inspired design boasts a remarkable reduction in weight, thanks to the implementation of advanced lightweight materials and improved structural design. When paired with the 3.5bar MAP sensor and Stage 2 Software, this combination significantly boosts power while ensuring safety.

CarBahn’s EVO intelligent software possesses remarkable adaptability to a large range of fuel octanes. Through our software, we employ retuning techniques while ensuring that all critical safety features, which are often neglected, remain intact and add additional safety features where necessary. To gain a deeper understanding of these safety limits, we invite you to watch the informative video available at this link. By recalibrating the safety limits, our software seamlessly adapts from 93 to 100 octane, eliminating the necessity for a customized tune when employing race gas. This unique functionality enables the software to deliver maximum power with each octane variant without compromise. Consequently, there is no need to purchase a custom tune exclusively for race gas usage. Our software is meticulously designed to provide the highest achievable performance output while upholding safety as a paramount concern. Here, the term “intelligent software” denotes the accurate and optimized tuning of the software, avoiding excessive tuning. Our objective is to craft a torque curve that maintains a natural and harmonious delivery, as showcased in this link. We avoid generating excessive torque at low RPMs, which could result in tire slippage, engine stress, and drivetrain failures. By managing torque with a smooth delivery, our software enhances drivability, thereby fostering increased speed and reliability. In contrast to our competitors, who often attempt to maximize performance by pushing boost levels beyond safe limits, our approach prioritizes reliability. We refrain from compromising knock sensitivity and thermal protections, which are vital for safeguarding the engine from potential damage caused by extreme power extraction. 

 

Durability:

Unlike most tunes available in the market, CarBahn’s software maintains the integrity of safety parameters, preserving them to prevent any compromise in engine performance and longevity. Parameters such as knock control sensitivity, super knocking control sensitivity, and catalyst thermal protection are carefully tuned within your OEM software to mitigate the risk of engine and catalyst failure. In our pursuit of optimizing power delivery, we have minimized power losses to a mere 12 HP when reducing these supposed power-reducing software protections. On the contrary, we have witnessed numerous instances of damaged engines resulting from the reduction of these safety parameters. Thus, it becomes apparent that gaining a marginal 12 HP advantage hardly justifies the potential risk of significant engine damage. 

 

Do-it-yourself Approach:

It is essential to acknowledge the emergence of self-tuning tools in the automotive market. While these tools offer the convenience of tuning your vehicle independently, it is crucial to exercise caution. Many of these tools come equipped with pre-set programs that conveniently bypass safety limits, thus posing a substantial risk of engine damage. The art of tuning a high-output engine requires profound knowledge and experience to extract maximum power without compromising the engine’s structural integrity. 

 

Emissions Legality: 

Let us address the topic of removing the catalyst, commonly achieved through the utilization of downpipes. Our rigorous testing regimen involved conducting consecutive dyno runs with and without the catalyst, and the observed power gain was significantly smaller than commonly touted, typically around 11 HP. Nevertheless, it is important to acknowledge our shared responsibility towards environmental preservation, as clean air is vital to our well-being. Furthermore, obtaining the necessary emissions certifications without a catalyst is a daunting task and, from a legal standpoint, it is considered an infringement. 

 

About Steve Dinan: 

With an illustrious career spanning over four decades, Steve Dinan stands as an authority in streetcar turbo tuning. Under his leadership, our team has triumphed in three prototype racing championships and secured two overall victories at the esteemed 24 Hours of Daytona in collaboration with Chip Ganassi Racing. Steve Dinan’s unparalleled expertise solidifies our claim as the leading force in tuning high-performance engines. 

 

Warranty Information:

* Registration with CarBahn at the time of purchase is required to maintain matching warranty coverage. CarBahn reserves the right to deny warranty program enrollment under certain conditions. Please contact us before making a purchase if you have any questions. 

* The warranty is valid for U.S. and Canadian specification vehicles only. If your vehicle is currently covered by the vehicle manufacturer’s new car limited warranty, CarBahn products are warranted for the remaining term of the vehicle manufacturer’s new car limited warranty. The manufacturer’s new car warranty is limited to 4 years or 50,000 miles (80,000 kilometers in Canada), starting from the date of first retail sale or the date the vehicle is first placed in-service as a demonstrator or company vehicle, whichever is earlier. CarBahn warranties are transferable when ownership of the vehicle into which the CarBahn products were originally installed is sold. The warranty will repair or replace, without charge for parts or labor, the defective CarBahn component(s) as well as any original vehicle manufacturer component(s) directly affected by a CarBahn component, using new or authorized remanufactured parts. The decision to repair or replace said parts is at the sole discretion of CarBahn. Parts replaced under this limited warranty become the property of CarBahn. A reasonable period must be allowed for warranty repairs to be completed in all cases. If your vehicle is outside of the vehicle manufacturer’s new car limited warranty, CarBahn will, at its sole discretion, repair or replace any defective CarBahn component for two (2) years from the original purchase date of the CarBahn product. This warranty does not include reimbursement for repairs to any original vehicle manufacturer component(s) that may have been affected by a CarBahn component. 

 

* Warranty exclusions: 

The following are not covered under the warranty: return shipping charges, towing charges, rental car fees, damage to a component or assembly due to the installation of replacement parts that materially differ from the original vehicle manufacturer or CarBahn parts, damage resulting from the unauthorized modification of a CarBahn part or assembly, damage resulting from the use of other manufacturer products in conjunction with CarBahn products or systems, damage to the clutch due to power shifting or abuse, brake rotor warp, friction materials, maintenance services and parts replaced during maintenance such as spark plugs, lubricants, fluids, engine tune-up parts, replacement of filters, coolant, and refrigerant, mechanical adjustments or repairs resulting from normal wear and tear, drive belts, light bulbs, damage due to the failure to perform maintenance services at the specified intervals or in accordance with the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn product instructions, damage attributable to negligence or abuse, improper installation, improper treatment or treatment contrary to the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn product instructions, engine damage resulting from alteration of CarBahn’s original boost pressure, damage resulting from the use of improper or contaminated fuel, damage occurring through corrosion resulting from weak or improper coolant, damage to a CarBahn component as a result of a collision or improper collision damage repairs, any vehicle operated in any competitive event or subjected to aggressive track conditions, custom-designed competition parts, damages resulting from loss of time, inconvenience or loss of the use of the vehicle, damage resulting from environmental influences, flood, accident, fire damage, or road salt corrosion, re-manufactured or refurbished products or components (these products are clearly identified as refurbished and are warranted for the specified period). 

 

Philosophy:

CarBahn has successfully engineered and manufactured the industry’s largest and most thermally efficient Heat Exchanger. By employing innovative design techniques, CarBahn has achieved a remarkable 40% increase in cooling capacity compared to existing Heat Exchangers in the market. Drawing inspiration from Formula 1 Heat Exchanger technology, CarBahn has integrated high-performance features and optimized flow dynamics to ensure unparalleled heat transfer efficiency.In addition to its superior thermal performance, CarBahn’s race inspired design boasts a remarkable reduction in weight, thanks to the implementation of advanced lightweight materials and improved structural design. When paired with the 3.5bar MAP sensor and Stage 2 Software, this combination significantly boosts power while ensuring safety.

CarBahn’s EVO intelligent software possesses remarkable adaptability to a large range of fuel octanes. Through our software, we employ retuning techniques while ensuring that all critical safety features, which are often neglected, remain intact and add additional safety features where necessary. To gain a deeper understanding of these safety limits, we invite you to watch the informative video available at this link. By recalibrating the safety limits, our software seamlessly adapts from 93 to 100 octane, eliminating the necessity for a customized tune when employing race gas. This unique functionality enables the software to deliver maximum power with each octane variant without compromise. Consequently, there is no need to purchase a custom tune exclusively for race gas usage. Our software is meticulously designed to provide the highest achievable performance output while upholding safety as a paramount concern. Here, the term “intelligent software” denotes the accurate and optimized tuning of the software, avoiding excessive tuning. Our objective is to craft a torque curve that maintains a natural and harmonious delivery, as showcased in this link. We avoid generating excessive torque at low RPMs, which could result in tire slippage, engine stress, and drivetrain failures. By managing torque with a smooth delivery, our software enhances drivability, thereby fostering increased speed and reliability. In contrast to our competitors, who often attempt to maximize performance by pushing boost levels beyond safe limits, our approach prioritizes reliability. We refrain from compromising knock sensitivity and thermal protections, which are vital for safeguarding the engine from potential damage caused by extreme power extraction. 

 

Durability:

Unlike most tunes available in the market, CarBahn’s software maintains the integrity of safety parameters, preserving them to prevent any compromise in engine performance and longevity. Parameters such as knock control sensitivity, super knocking control sensitivity, and catalyst thermal protection are carefully tuned within your OEM software to mitigate the risk of engine and catalyst failure. In our pursuit of optimizing power delivery, we have minimized power losses to a mere 12 HP when reducing these supposed power-reducing software protections. On the contrary, we have witnessed numerous instances of damaged engines resulting from the reduction of these safety parameters. Thus, it becomes apparent that gaining a marginal 12 HP advantage hardly justifies the potential risk of significant engine damage. 

 

Do-it-yourself Approach:

It is essential to acknowledge the emergence of self-tuning tools in the automotive market. While these tools offer the convenience of tuning your vehicle independently, it is crucial to exercise caution. Many of these tools come equipped with pre-set programs that conveniently bypass safety limits, thus posing a substantial risk of engine damage. The art of tuning a high-output engine requires profound knowledge and experience to extract maximum power without compromising the engine’s structural integrity. 

 

Emissions Legality: 

Let us address the topic of removing the catalyst, commonly achieved through the utilization of downpipes. Our rigorous testing regimen involved conducting consecutive dyno runs with and without the catalyst, and the observed power gain was significantly smaller than commonly touted, typically around 11 HP. Nevertheless, it is important to acknowledge our shared responsibility towards environmental preservation, as clean air is vital to our well-being. Furthermore, obtaining the necessary emissions certifications without a catalyst is a daunting task and, from a legal standpoint, it is considered an infringement. 

 

About Steve Dinan: 

With an illustrious career spanning over four decades, Steve Dinan stands as an authority in streetcar turbo tuning. Under his leadership, our team has triumphed in three prototype racing championships and secured two overall victories at the esteemed 24 Hours of Daytona in collaboration with Chip Ganassi Racing. Steve Dinan’s unparalleled expertise solidifies our claim as the leading force in tuning high-performance engines. 

 

Warranty Information:

* Registration with CarBahn at the time of purchase is required to maintain matching warranty coverage. CarBahn reserves the right to deny warranty program enrollment under certain conditions. Please contact us before making a purchase if you have any questions. 

* The warranty is valid for U.S. and Canadian specification vehicles only. If your vehicle is currently covered by the vehicle manufacturer’s new car limited warranty, CarBahn products are warranted for the remaining term of the vehicle manufacturer’s new car limited warranty. The manufacturer’s new car warranty is limited to 4 years or 50,000 miles (80,000 kilometers in Canada), starting from the date of first retail sale or the date the vehicle is first placed in-service as a demonstrator or company vehicle, whichever is earlier. CarBahn warranties are transferable when ownership of the vehicle into which the CarBahn products were originally installed is sold. The warranty will repair or replace, without charge for parts or labor, the defective CarBahn component(s) as well as any original vehicle manufacturer component(s) directly affected by a CarBahn component, using new or authorized remanufactured parts. The decision to repair or replace said parts is at the sole discretion of CarBahn. Parts replaced under this limited warranty become the property of CarBahn. A reasonable period must be allowed for warranty repairs to be completed in all cases. If your vehicle is outside of the vehicle manufacturer’s new car limited warranty, CarBahn will, at its sole discretion, repair or replace any defective CarBahn component for two (2) years from the original purchase date of the CarBahn product. This warranty does not include reimbursement for repairs to any original vehicle manufacturer component(s) that may have been affected by a CarBahn component. 

 

* Warranty exclusions: 

The following are not covered under the warranty: return shipping charges, towing charges, rental car fees, damage to a component or assembly due to the installation of replacement parts that materially differ from the original vehicle manufacturer or CarBahn parts, damage resulting from the unauthorized modification of a CarBahn part or assembly, damage resulting from the use of other manufacturer products in conjunction with CarBahn products or systems, damage to the clutch due to power shifting or abuse, brake rotor warp, friction materials, maintenance services and parts replaced during maintenance such as spark plugs, lubricants, fluids, engine tune-up parts, replacement of filters, coolant, and refrigerant, mechanical adjustments or repairs resulting from normal wear and tear, drive belts, light bulbs, damage due to the failure to perform maintenance services at the specified intervals or in accordance with the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn product instructions, damage attributable to negligence or abuse, improper installation, improper treatment or treatment contrary to the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn product instructions, engine damage resulting from alteration of CarBahn’s original boost pressure, damage resulting from the use of improper or contaminated fuel, damage occurring through corrosion resulting from weak or improper coolant, damage to a CarBahn component as a result of a collision or improper collision damage repairs, any vehicle operated in any competitive event or subjected to aggressive track conditions, custom-designed competition parts, damages resulting from loss of time, inconvenience or loss of the use of the vehicle, damage resulting from environmental influences, flood, accident, fire damage, or road salt corrosion, re-manufactured or refurbished products or components (these products are clearly identified as refurbished and are warranted for the specified period). 

 

CarBahn has produced the largest most thermally efficient heat exchanger on the market. Increasing cooling capacity by 40%. This heat exchanger utilizes F1 heat exchanger technology. This heat exchanger technology is dramatically more efficient than the lower cost heat exchangers on the market. The race car heat exchanger is significantly lighter weight.

Increasing boost generates more heat. The addition of the heat exchanger allows you to run more boost safely by reducing charge air temperature. This reduction in charge air temperature also makes more power.This is particularly noticeable in summer months when ambient temperature is high.

When used in conjunction with CarBahn software the addition of this heat exchanger providers enough safety that we can offer a factory matching warranty on your engine and drivetrain.

Dual intercoolers

CarBahn CSF larger dual intercoolers is a very efficient heat exchanging that will allow you to run more boost and extract more power. They are a very efficient intercooler replacement and are tied into the stock heat exchanger circuit. They work best when used in conjunction with CarBahn heat exchangers and software. They are designed to compensate for additional heat generated by increased boost. The reduced intake air temperature increases air density and is a must to extract maximum power and ensure reliability of the engine with High boost applications.

 

About Steve Dinan: 

Steve Dinan has over 40 years of streetcar tuning experience. As an engine supplier we won 3 prototype racing championships and two overall wins at the 24hrs of Daytona partnering with Chip Ganassi Racing. No one know more about tuning high performance engines than Steve Dinan.

 

Warranty Information:

*Registration with CarBahn Autoworks at time of purchase is required to maintain matching warranty coverage. CarBahn Autoworks reserves the right to deny warranty program enrollment under certain conditions. Please contact us prior to purchase if you have any questions.

*Warranty valid on U.S. and Canadian specification vehicles only. If your vehicle is currently covered by the vehicle manufacturer’s new car limited warranty, CarBahn Autoworks’ products are warranted for the remaining term of the vehicle manufacturer’s new car limited warranty. The manufacturer’s new car warranty is limited to 4 years or 50,000 miles (80,000 kilometers in Canada), commencing on the date of first retail sale or the date the vehicle is first placed in-service as a demonstrator or company vehicle, whichever is earlier. CarBahn Autoworks’ warranties are transferable when ownership of the vehicle into which the CarBahn Autoworks products were originally installed is sold. The warranty will, without charge for parts or labor, repair or replace the defective CarBahn Autoworks’ component(s), as well as any original vehicle manufacturer’s component(s) that may have been directly affected by a CarBahn Autoworks component, using new or authorized remanufactured parts. The decision to repair or replace said parts is at the sole discretion of CarBahn Autoworks. Parts for which replacements are supplied under this limited warranty become the property of CarBahn Autoworks. In all cases, a reasonable period must be allowed for warranty repairs to be completed.

If your vehicle is outside of the vehicle manufacturer’s new car limited warranty, for two (2) years from the original purchase date of the CarBahn Autoworks product, CarBahn Autoworks will repair or replace, at its sole discretion, any defective CarBahn Autoworks component. This warranty does not include reimbursement for repairs to any original vehicle manufacturer’s component(s) that may have been affected by a CarBahn Autoworks component.

*Warranty exclusions:

Return shipping charges, towing charges, rental car fees, damage to a component or assembly due to the installation of replacement parts with specifications that differ in any material respect from the original vehicle manufacturer’s or CarBahn Autoworks parts, damage resulting from the unauthorized modification of a CarBahn Autoworks part or assembly, damage resulting from the use of other manufacturer’s products in conjunction with CarBahn Autoworks’ products or systems, damage to the clutch due to power shifting or abuse, brake rotor warp, friction materials, maintenance services and parts when replaced during maintenance such as spark plugs, lubricants, fluids, engine tune-up parts, replacement of filters, coolant and refrigerant, mechanical adjustments or repairs which result from normal wear and tear, drive-belts, light bulbs, damage due to the failure to perform maintenance services at the specified intervals or in accordance with the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn Autoworks’ product instructions, damage attributable to negligence or abuse, improper installation, improper treatment or treatment contrary to the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn Autoworks’ product instructions, engine damage resulting from alteration of CarBahn Autoworks’ original boost pressure, damage resulting from the use of improper or contaminated fuel, damage occurring through corrosion resulting from weak or improper coolant, damage to a CarBahn Autoworks component as a result of a collision or improper collision damage repairs, any vehicle operated in any competitive event or subjected to aggressive track conditions, custom-designed competition parts, damages resulting from loss of time, inconvenience or loss of the use of the vehicle, damage resulting from environmental influences, flood, accident, fire damage, or road salt corrosion, re-manufactured or refurbished products or components (these products are clearly identified as re-furbished and are warranted for the period specified for that particular product).

Experience a surge in performance with Carbahn’s S63 F9X High-Flow Replacement Intake Air Filters for your BMW M5/M8. Crafted with precision engineering and premium materials, this filter enhances airflow to optimize engine efficiency and power output. Engineered to surpass OEM standards, it ensures superior filtration while maintaining maximum airflow. Unleash the full potential of your BMW with Carbahn’s high-performance intake air filter upgrade. CarBahn measured a power gain of 15 hp.

CarBahn Cold air intake consists of a Carbon Fiber Airbox Lid replacement for OEM airbox lid to reduce weight and add visual appeal to the engine bay and a high flow filter. The high flow filter increases power between 7-15hp depending on boost pressure and application. CarBahn CAI is completely sealed like the OEM system, so no power is lost from hot air leaking into the intake like most aftermarket systems that are designed for style and noise, not function.

 

CarBahn Titanium exhaust

The CarBahn high flow exhaust is made of titanium for maximum durability and light weight. This is a complete cat back exhaust not just a pair of axle back mufflers. The exhaust is lightened between 25lbs and 40lbs depending on the application.

The CarBahn exhaust retains the OEM catalyst and electronic controller valve in the mufflers for a mellow sporty sound when driving normal without the drone normally associated with most aftermarket exhausts. When you go to WOT and the ecu will open the electronic valve increases flow for maximum power making a very sporty sound without being too loud.

This exhaust also comes with titanium and carbon exhaust tips.

The CarBahn High flow exhaust is made of stainless steel for maximum durability. This is a complete cat back exhaust not just a pair of axle back mufflers.

The CarBahn exhaust retains the OEM catalyst and electronic controller valve in the mufflers for a mellow sporty sound when driving normally without the drone usually associated with most aftermarket exhausts. When you go to WOT ECU will open the electronic valve increases flow for maximum power making a very sporty sound without being too loud.

The exhaust comes with stainless tips however a CarBahn, Carbon exhaust tip is also available.

Carbahn’s EVM (Exhaust Valve Module) allows you to open the factory exhaust flaps of your car 100% at all times by pressing “Open” (Button 1) on the remote control. If you wish to revert to factory settings, press “Stock” (Button 2) on the remote control.  Works with all F and G series cars.

 

• User Activation is independent of vehicle drive mode
  • Override your cars factory exhaust flap setting with the push of a button.
• EVM does not engage with CAN-Bus
  • No interference with any control units, No Check Engine Lights
  • Factory Software updates do not interfere with the functionality of the EVM.
• Plug and Play with vehicle original exhaust valve plugs
  • No cutting wires, no damage to factory cables, no exposed connectors, fully reversible.
• Waterproof module for mounting underneath vehicle

Electrical pulses to the spark plugs are what ignite the raw fuel in each cylinder, and with forced induction engines having increased pressure per cylinder, a consistent and reliable pulse and electrical spark are critical for optimal fuel burn, in turn, making horsepower.

Stay on top of unwanted misfires and unburned fuel with high performance replacement ignition coils for your high performing engine.

This product is a direct or consolidated replacement part from the manufacturers application guide which is legal for sale and use on emissions controlled vehicles.

Replaces OEM p/n: 12-13-8-611-236, 12138616153, 12138647689, 12138611236, 12138657273, 12120039634, 12120039664, 12130148594, 12130148594, 12131712219, 12137575010, 12137594596, 12137594937, 12137594938, 0.022150447

CarBahn is proud to announce the Monoball for the F9X BMW M5 & M8 models.

The CarBahn Monoball Kit replaces the rubber bushings in the stock thrust arms with sealed precision ball joints inside machined aluminum housings. As a result of eliminating the deflection that is inherent in rubber bushings, braking stability is improved, and the tendency for the car to follow ruts in the road (especially with wider wheels and tires) is reduced.

The bearings inside the Monoball Assembly are nylon-lined for quiet operation, and are sealed against water and debris intrusion for longevity.

 

The stock rear toe link is built with rubber bushings and a curved forged alloy rod which can easily flex. During hard acceleration, this flex allows the rear wheels to have excessive toe changes. All this flex in the stock toe link causes the car to be unstable when pushing the limits of acceleration.  CarBahn eliminates this flex by replacing the rubber bushings with Teflon coated machined steel rod ends, and the OEM curved bar with a straight billet aluminum rod. Most, if not all, of our competitors’ products wrap the rod end in a loose rubber boot, which not only allows water and debris to enter but also retains them which results in excessive noise and a short service life until the rod ends must be replaced. The CarBahn rod ends are sealed perfectly against water and environmental contamination, thus providing a long, quiet, maintenance-free service life.

 

CarBahn is proud to present the High-Performance Coil-Over Suspension System for the F90 M5, F90 M5 Competition, F91 M8 Convertible, F91 M8 Competition Convertible, F92 M8 Coupe, F92 M8 Competition Coupe, F93 M8 Gran Coupe and F93 M8 Competition Gran Coupe models.

Benefits of CarBahn Performance Coil-Over Suspension System:

• Threaded collars allow easy and precise front & rear vehicle height adjustments.
• Up to 1 1/4″ of lowering in front and 1 1/4″ of lowering in back are possible depending on tire clearance.
• Spring rates are nearly 10% stiffer in front and 10% stiffer in the rear.
• Substantial reduction in body roll.
• Included suspension packers allow adjustment of bump-stop clearance to fine-tune handling and comfort.
• CarBahn-spec progressive bump stops improve ride quality at lowered ride heights.
• Components are machined from 6061-T6 aluminum
• Stock upper spring mounts are utilized for quiet operation.

 

*Note: Due to the extensive lowering possible, and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. CarBahn is not responsible for any property damage or injury.

 

Estimated Installation Time:

M5 Sedan, M5 Competition Sedan, M8 Gran Coupe and M8 Competition Gran Coupe: 9.50 hours (Includes ride height adjustment and excludes alignment)

M8 Coupe, M8 Competition Coupe, M8 Convertible and M8 Competition Convertible: 8.00 hours (Includes ride height adjustment and excludes alignment)

The stock rear toe link is built with rubber bushings and a curved forged alloy rod which can easily flex. During hard acceleration, this flex allows the rear wheels to have excessive toe changes. All this flex in the stock toe link causes the car to be unstable when pushing the limits of acceleration.  CarBahn eliminates this flex by replacing the rubber bushings with Teflon coated machined steel rod ends, and the OEM curved bar with a straight billet aluminum rod. Most, if not all, of our competitors’ products wrap the rod end in a loose rubber boot, which not only allows water and debris to enter but also retains them which results in excessive noise and a short service life until the rod ends must be replaced. The CarBahn rod ends are sealed perfectly against water and environmental contamination, thus providing a long, quiet, maintenance-free service life.

 

Unleash the full potential of your BMW M5 or M8 with our carbon fiber center engine piece. Designed to replace the stock component seamlessly, this upgrade adds a touch of precision and performance to your engine bay. Crafted with meticulous attention to detail, our carbon fiber center piece not only enhances the visual appeal but also reflects the high-performance capabilities of your M5 or M8. Elevate your driving experience and stand out from the crowd with our premium carbon fiber engine upgrade. 

– BMW M Badge not included.

CarBahn Part#: CBB04-00-4152

Complete the look of your BMW M5 or M8 with our meticulously crafted carbon fiber side engine covers, designed to perfectly complement our center engine piece. These covers seamlessly replace the stock components, adding a sleek and aggressive aesthetic to your engine bay. Handcrafted with precision and attention to detail, our carbon fiber side covers not only enhance the visual appeal but also reflect the high-performance essence of your M5 or M8. Elevate your driving experience and make a statement on the road with our premium carbon fiber engine upgrades. 

– BMW M Badge not included.

CarBahn Part#: CBB04-00-0310

Carbahn Dry Carbon Fiber Front Splitter with gloss finish for the BMW M8.  Fitment for all variations of BMW M8 (F91, 92, 93).  Aggressive looks, and enhanced performance made from high quality, light weight carbon fiber.  Improve the appearance of your M car with tasteful lines to stand out from the crowd.

CarBahn Gloss Carbon Fiber Mirror Covers for the BMW M5 / M8. Aggressive looks, and enhanced performance made from high quality, light weight carbon fiber.  Improve the appearance of your M car with tasteful lines to stand out from the crowd.

Stage 1 S63 TU4 High Performance Engine: F90 M5, F91, F92, F93 M8

Steve Dinan has been building high performance and racing engines for BMW since 1977, winning 11 racing championships including 3 prototype championships and two 24 Hours of Daytona. The same engine shop that builds the racing engines also builds the street car engines. These talented engineers, machinists, and builders have built hundreds of engines from OEM street rebuilds to full-blown racing engines.

From stock, the S63 engine is not designed for a large increase in boost.CarBahn Autoworkshas designed a high-performance engine to handle very high outputs by utilizing higher quality racing Carrillo connecting rods and forged CP pistons.

The stock engine compression ratio is relatively high due to the Corporate Average Fuel Economy (CAFE) standards which push for consistently higher fuel economy in cars and trucks. However, this increased compression limits engine performance with higher boost settings by decreasing the size of the fuel-air charge in the combustion chamber, forcing the ignition timing to retard far below MBT (Mean Best Timing, the theoretical optimal ignition timing). Therefore, the Carbahn Autoworks S63 engine has 0.5 less compression to optimize the engine for the increased boost. In an emissions-legal street car, the lowered compression has the added benefit of reducing catalyst inlet temperatures and improved drive-ability on pump gas.

Engine core acceptance parameters

Must be complete core (factory engine, from oil pan to valve cover)

• Block must have no:
  • Holes or cracks in casting
  • Holes or crack in covers
  • Bore damage that cannot be honed out
  • Thrust surface damage
  • Journal surfaces damage
  • Bolt hole damage that can’t be repaired
• Heads must have no:
  • Holes or cracks in casting
  • Holes or crack in covers
  • Thrust surface damage
  • Journal surfaces damage
  • Bolt hole damage that can’t be repaired
• Additional repair charges could apply for damaged items that are not normally changed during an overhaul and cannot be repaired or serviced
  • Valves
  • Crankshafts
  • Camshafts
  • Guides
  • ValveTronic mechanism
  • Vanos mechanism

Stage 2 S63 TU4 High Performance Engine: F90 M5, F91, F92, F93 M8

Steve Dinan has been building high performance and racing engines for BMW since 1977, winning 11 racing championships including 3 prototype championships and two 24 Hours of Daytona. The same engine shop that builds the racing engines also builds the street car engines. These talented engineers, machinists, and builders have built hundreds of engines from OEM street rebuilds to full-blown racing engines.

From stock, the S63 engine is not designed for a large increase in boost. CarBahn has designed a high-performance engine to handle very high outputs by utilizing higher quality racing Carrillo connecting rods and forged CP pistons.

The stock engine compression ratio is relatively high due to the Corporate Average Fuel Economy (CAFE) standards which push for consistently higher fuel economy in cars and trucks. However, this increased compression limits engine performance with higher boost settings by decreasing the size of the fuel-air charge in the combustion chamber, forcing the ignition timing to retard far below MBT (Mean Best Timing, the theoretical optimal ignition timing). Therefore, the Carbahn Autoworks S63 engine has 0.5 less compression to optimize the engine for the increased boost. In an emissions-legal street car, the lowered compression has the added benefit of reducing catalyst inlet temperatures and improved drive-ability on pump gas.

Engine core acceptance parameters

Must be complete core (factory engine, from oil pan to valve cover)

• Block must have no:
  • Holes or cracks in casting
  • Holes or crack in covers
  • Bore damage that cannot be honed out
  • Thrust surface damage
  • Journal surfaces damage
  • Bolt hole damage that can’t be repaired
• Heads must have no:
  • Holes or cracks in casting
  • Holes or crack in covers
  • Thrust surface damage
  • Journal surfaces damage
  • Bolt hole damage that can’t be repaired
• Additional repair charges could apply for damaged items that are not normally changed during an overhaul and cannot be repaired or serviced
  • Valves
  • Crankshafts
  • Camshafts
  • Guides
  • ValveTronic mechanism
  • Vanos mechanism

 

Derived from our GTD1 racing wheel, the Forgeline GT1 5-Lug brings its racing DNA to the street. The GT1 5-Lug combines the latest in advanced wheel technology, including one piece forged monoblock construction, motorsport engineered design, I-beamed spokes, and I-beamed spoke spans to deliver head-turning good looks with track-ready capability.

The Forgeline GT1 5-Lug is a fully-forged one-piece monoblock wheel that is manufactured using technology similar to our very successful GA1R wheel. The GT1 5-Lug’s concave 10-spoke design includes extra long spokes that extend beyond the hidden lug holes while allowing plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is very lightweight, extremely stiff, and has excellent fatigue strength. The GT1 5-Lug is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, 21, and 22-inch diameters. (Please Note: Depending on size, the GT1 5-Lug may be available in deep, medium, or shallow concave profiles.) And just like any Forgeline wheel, the GT1 5-Lug is available with fully customizable finish options.

 

• • One-Piece Monoblock Construction
  • Concave Profile
  • 10-Spoke Design
  • Extended Spoke Length
  • Hidden Lug Holes
  • I-Beamed Spoke Technology
  • I-Beamed Spoke Spans Along the Lip
  • Very Lightweight
  • Generous Brake Clearance
  • Forged 6061-T6 Aluminum
  • Customizable Finish Options
  • Legendary Forgeline Quality and Customer Service

The Forgeline GA1R is a fully-forged one-piece monoblock wheel that utilizes much of the technology and design of our very successful GA3R racing wheel, including our “I-beamed” spoke technology. The concave design of the GA1R not only looks great, but allows plenty of room for caliper clearance and extreme brake fitment, while the one-piece monoblock forging and I-beamed spoke design yield a wheel that is extremely stiff with fatigue strength equal to our proven GA3R. And yet despite the strength and stiffness, for most applications and sizes, it also delivers a high-performance weight reduction – making it perfect for motorsports and racing applications or the discerning street enthusiast who demands the ultimate in performance capability!

The GA1R is designed for racing. It is engineered with a 2100 lb. street-tire load rating (per wheel) to ensure strength and integrity, even when subjected to the massive loads encountered on the stickiest race tires.

The GA1R is produced using our traditional forging method from 6061-T6 aluminum. It is currently available in 18, 19, 20, 21, and 22-inch sizes with a range of widths and offsets. (Please Note: Depending on size, the GA1R may be available in deep, medium, or shallow concave profiles. See sizing chart for details.) And just like any Forgeline wheel, the GA1R is available with fully customizable finish options.

The GA1R is also available for limited applications in Deep Cap (DC) and Extra Deep Cap (EDC) profiles. These Deep Cap profiles employ unique in-house lathe turnings that allow us to position the center cap deep within the center of the wheel and create an exaggerated extra-aggressive concave look. This option is an excellent choice for select vehicles including the BMW M3, Nissan GT-R, ZL1 Camaro, C6 Z06 Corvette (rear only), and certain Porsche models (rear only).

• • One-Piece Monoblock Design
  • Concave Profile
  • Deep Cap (DC) and Extra Deep Cap (EDC) Options Available for Select Applications
  • I-Beamed Spoke Technology
  • Extreme Stiffness
  • Extreme Fatigue Strength
  • 2100 lb. Street-Tire Load Rating (per wheel)
  • Lightweight
  • Generous Brake Clearance
  • Forged 6061-T6 Aluminum
  • Includes Standard Aluminum Center Cap
  • Customizable Finish Options
  • Legendary Forgeline Quality and Customer Service

The striking NW101 continues the exciting evolution in Forgeline monoblock design. It delivers cutting-edge styling with five multi-dimensional split spokes that span integrated lug holes and strong chamfered edges. And the NW101’s relatively open spoke pattern is perfect for showing off the sexy giant brakes that are found on most serious modern performance vehicles.

The NW101 is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, 21, and 22-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the NW101 may be available in deep, medium, or shallow concave profiles.) And just like any Forgeline wheel, the NW101 is available with fully customizable finish options.

 

• • Custom Made-to-Order for Each Customer and Each Unique Vehicle Application
  • One-Piece Forged Monoblock Construction
  • Precision Machined from Forged 6061-T6 Aluminum
  • Concave Profile
  • Five Multi-Dimensional Split Spokes Span Integrated Lug Holes
  • Open Spoke Pattern Compliments Giant Modern Brakes
  • Strong Chamfered Machining Details
  • Generous Brake Clearance
  • Includes Standard Aluminum Center Cap
  • Customizable Finish Options
  • Legendary Forgeline Quality and Customer Service

The AR1 is an exciting evolution in Forgeline monoblock styling, with a very angular split spoke pattern, extra-deep concave profile, and radically-chamfered outer edge. The fully-forged Forgeline AR1 one piece monoblock wheel utilizes manufacturing technology similar to the very successful GA1R wheel. Beyond just beautiful style, the AR1 is engineered to allow plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging, computer-simulated FEA design process, and I-beam spoke technology yield a wheel that is lightweight, stiff, and has excellent fatigue strength.

The Forgeline AR1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the AR1 may be available in deep, medium, or shallow concave profiles.)

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline AR1 one piece monoblock wheel set starts at $6600.00 depending on size and finish. To purchase this wheel set, please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Derived from the GTD1 racing wheel, the Forgeline GT1 5-Lug one piece monoblock wheel brings its racing DNA to the street. The GT1 5-Lug combines the latest in advanced wheel technology, including one piece forged monoblock construction, motorsport engineered design, I-beamed spokes, and I-beamed spoke spans to deliver head-turning good looks with track-ready capability.

The GT1 5-Lug is a fully-forged one-piece monoblock wheel that is manufactured using technology similar to the very successful GA1R wheel. The GT1 5-Lug’s concave 10-spoke design includes extra long spokes that extend beyond the hidden lug holes while allowing plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is very lightweight, extremely stiff, and has excellent fatigue strength.

The Forgeline GT1 5-Lug one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters. (Please Note: Depending on size, the GT1 5-Lug may be available in deep, medium, or shallow concave profiles.)

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline GT1 5-Lug one piece monoblock wheel set starts at $8400.00 depending on size and finish. To purchase a wheel set with a finish option other than those available above, please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

 

The RB1 is a fully-forged wheel that utilizes manufacturing technology similar to the very successful GA1R wheel. The Forgeline RB1 one piece monoblock wheel features a concave 10-spoke design with a subtle directional twist on each spoke, so each set includes unique left and right versions. The RB1 also utilizes Forgeline’s I-beam technology along each spoke and along the front lip between spokes to reduce mass and enhance strength & rigidity. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, extremely stiff, and has excellent fatigue strength.

The Forgeline RB1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the RB1 may be available in deep, medium, or shallow concave profiles.)

The Forgeline one piece monoblock RB1 is also available for limited applications in Deep Cap (DC) and Extra Deep Cap (EDC) profiles. These Deep Cap profiles employ unique in-house lathe turnings that allow us to position the center cap deep within the center of the wheel and create an exaggerated extra-aggressive concave look. This option is an excellent choice for select vehicles including the BMW M3 and certain Porsche models (rear only)

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline RB1 one piece monoblock wheel set starts at $6200.00 depending on size and finish. To purchase this wheel set, please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Please note, images are for representational purposes only. Actual product may vary.

 

The Forgeline MT1 continues the exciting evolution in Forgeline monoblock styling. It features a ten spoke mesh design, unique deeply-cut diamonds machined into the base of each spoke around the center of the wheel, deep concave profile, and radically-chamfered outer edge. The MT1 is a fully-forged one-piece monoblock wheel that utilizes manufacturing technology similar to our very successful GA1R wheel. Beyond just beautiful style, the Forgeline MT1 one piece monoblock wheel is engineered to allow plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, stiff, and has excellent fatigue strength.

The Forgeline MT1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the MT1 may be available in deep, medium, or shallow concave profiles.) Like any Forgeline wheel, the MT1 is available with fully customizable finish options.

 

One-Piece Forged Monoblock Construction
Concave Profile
Ten Spoke Mesh Design
Unique Diamond Pattern Machined Into Each Spoke Base
Strong Chamfered Machining Details
Lightweight
Generous Brake Clearance
Forged 6061-T6 Aluminum
Includes Standard Aluminum Center Cap
Customizable Finish Options
Legendary Forgeline Quality

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline MT1 one piece monoblock wheel set starts at $8400.00 depending on size and finish. To purchase a wheel set with a finish option other than shown above, please please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Please note, images are for representational purposes only. Actual product may vary.

 

 

 

The VX1 continues the exciting evolution in Forgeline monoblock styling. It features a sharp Y-spoke design (with long spokes that wrap around the lug holes), striking sharp angles, deep concave profile, and radically-chamfered outer edge. The Forgeline VX1 is a fully-forged one-piece monoblock wheel that utilizes manufacturing technology similar to our very successful GA1R wheel. Beyond just beautiful style, the Forgeline VX1 one piece monoblock wheel is engineered to allow plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, stiff, and has excellent fatigue strength.

The Forgeline VX1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, 21, and 22-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the VX1 may be available in deep, medium, or shallow concave profiles.)

One-Piece Forged Monoblock Construction
Concave Profile
Sharp Y-Spoke Design
Striking Sharp Angles
Strong Chamfered Machining Details
Lightweight
Generous Brake Clearance
Forged 6061-T6 Aluminum
Includes Standard Aluminum Center Cap
Customizable Finish Options
Legendary Forgeline Quality

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline VX1 one piece monoblock wheel set starts at $8400.00 depending on size and finish. To purchase a wheel set with a finish option other than those available above, please please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Please note, images are for representational purposes only. Actual product may vary.

 

Introducing the Carbahn License Plate Frame – the ultimate accessory to elevate your vehicle’s style and turn heads wherever you go. Crafted with premium materials and a sleek, modern design, this license plate frame is not just a functional necessity but a statement piece that tells other drivers that you have the best tuned car around.

Features:

• Premium Quality: Made from high-grade stainless steel, ensuring durability and a long-lasting shine that resists rust and corrosion.
• Sleek Design: Its minimalist, yet elegant design complements any car model, giving your vehicle a polished and sophisticated look.
• Easy Installation: Comes with all the necessary hardware for a quick and hassle-free installation, making it a perfect DIY project.
• Universal Fit: Designed to fit all standard US and Canadian license plates, ensuring compatibility with a wide range of vehicles.
• Customizable: Available in two finishes – matte black and brushed metal – so you can choose the one that best matches your car’s aesthetic.