The Stage 1 Power package is safe and powerful. Combining the latest heat exchanger technology. CarBahn’s Heat exchanger increases OEM heat exchanger capacity by 40%! This heat exchanger uses F1 heat exchanger technology. This makes our heat exchanger dramatically more efficient than the lower cost heat exchangers on the market. The race car heat exchanger is also very light. Combined with Performance controller and ST 2 software the St 1 PP is fast and durable. The CarBahn Performance Controller (CPC) is an easy-to-install electronic control unit (ECU) that significantly boosts the turbocharged cars’ horsepower and torque. This plug-and-play unit offers selectable maps, which can be accessed through a smartphone application via Bluetooth.

To access this app, you can download them from either the Apple App Store or the Google Play Store.

These maps are specifically designed to optimize performance based on different octane fuel levels. You have the flexibility to choose between 91, 93, and 100 octane options.

Additionally, CarBahn offers an optional powertrain warranty for all their products, including the CPC.

If you wish to switch from the CarBahn Performance Controller to software in the future, there is an upgrade fee of $250. However, if you have purchased a warranty, it can be transferred to the software upgrade at no additional charge!!

Emissions Legality:

Let us address the topic of removing the catalyst, commonly achieved through the utilization of downpipes. Our rigorous testing regimen involved conducting consecutive dyno runs with and without the catalyst, and the observed power gain was significantly smaller than commonly touted, typically around 11 HP. Nevertheless, it is important to acknowledge our shared responsibility towards environmental preservation, as clean air is vital to our well-being. Furthermore, obtaining the necessary emissions certifications without a catalyst is a daunting task and, from a legal standpoint, it is considered an infringement.

About Steve Dinan:

With an illustrious career spanning over four decades, Steve Dinan stands as an authority in streetcar turbo tuning. Under his leadership, our team has triumphed in three prototype racing championships and secured two overall victories at the esteemed 24 Hours of Daytona in collaboration with Chip Ganassi Racing. Steve Dinan’s unparalleled expertise solidifies our claim as the leading force in tuning high-performance engines.

Warranty Information:

* Registration with CarBahn at the time of purchase is required to maintain matching warranty coverage. CarBahn reserves the right to deny warranty program enrollment under certain conditions. Please contact us before making a purchase if you have any questions. 

* The warranty is valid for U.S. and Canadian specification vehicles only. If your vehicle is currently covered by the vehicle manufacturer’s new car limited warranty, CarBahn products are warranted for the remaining term of the vehicle manufacturer’s new car limited warranty. The manufacturer’s new car warranty is limited to 4 years or 50,000 miles (80,000 kilometers in Canada), starting from the date of first retail sale or the date the vehicle is first placed in-service as a demonstrator or company vehicle, whichever is earlier. CarBahn warranties are transferable when ownership of the vehicle into which the CarBahn products were originally installed is sold. The warranty will repair or replace, without charge for parts or labor, the defective CarBahn component(s) as well as any original vehicle manufacturer component(s) directly affected by a CarBahn component, using new or authorized remanufactured parts. The decision to repair or replace said parts is at the sole discretion of CarBahn. Parts replaced under this limited warranty become the property of CarBahn. A reasonable period must be allowed for warranty repairs to be completed in all cases. If your vehicle is outside of the vehicle manufacturer’s new car limited warranty, CarBahn will, at its sole discretion, repair or replace any defective CarBahn component for two (2) years from the original purchase date of the CarBahn product. This warranty does not include reimbursement for repairs to any original vehicle manufacturer component(s) that may have been affected by a CarBahn component.

* Warranty exclusions:

The following are not covered under the warranty: return shipping charges, towing charges, rental car fees, damage to a component or assembly due to the installation of replacement parts that materially differ from the original vehicle manufacturer or CarBahn parts, damage resulting from the unauthorized modification of a CarBahn part or assembly, damage resulting from the use of other manufacturer products in conjunction with CarBahn products or systems, damage to the clutch due to power shifting or abuse, brake rotor warp, friction materials, maintenance services and parts replaced during maintenance such as spark plugs, lubricants, fluids, engine tune-up parts, replacement of filters, coolant, and refrigerant, mechanical adjustments or repairs resulting from normal wear and tear, drive belts, light bulbs, damage due to the failure to perform maintenance services at the specified intervals or in accordance with the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn product instructions, damage attributable to negligence or abuse, improper installation, improper treatment or treatment contrary to the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn product instructions, engine damage resulting from alteration of CarBahn’s original boost pressure, damage resulting from the use of improper or contaminated fuel, damage occurring through corrosion resulting from weak or improper coolant, damage to a CarBahn component as a result of a collision or improper collision damage repairs, any vehicle operated in any competitive event or subjected to aggressive track conditions, custom-designed competition parts, damages resulting from loss of time, inconvenience or loss of the use of the vehicle, damage resulting from environmental influences, flood, accident, fire damage, or road salt corrosion, re-manufactured or refurbished products or components (these products are clearly identified as refurbished and are warranted for the specified period).

Philosophy:

CarBahn’s EVO intelligent software possesses remarkable adaptability to a large range of fuel octanes. Through our software, we employ retuning techniques while ensuring that all critical safety features, which are often neglected, remain intact and add additional safety features where necessary. To gain a deeper understanding of these safety limits, we invite you to watch the informative video available at this link. By recalibrating the safety limits, our software seamlessly adapts from 93 to 100 octane, eliminating the necessity for a customized tune when employing race gas. This unique functionality enables the software to deliver maximum power with each octane variant without compromise. Consequently, there is no need to purchase a custom tune exclusively for race gas usage. Our software is meticulously designed to provide the highest achievable performance output while upholding safety as a paramount concern. Here, the term “intelligent software” denotes the accurate and optimized tuning of the software, avoiding excessive tuning. Our objective is to craft a torque curve that maintains a natural and harmonious delivery, as showcased in this link. We avoid generating excessive torque at low RPMs, which could result in tire slippage, engine stress, and drivetrain failures. By managing torque with a smooth delivery, our software enhances drivability, thereby fostering increased speed and reliability. In contrast to our competitors, who often attempt to maximize performance by pushing boost levels beyond safe limits, our approach prioritizes reliability. We refrain from compromising knock sensitivity and thermal protections, which are vital for safeguarding the engine from potential damage caused by extreme power extraction.

Durability:

Unlike most tunes available in the market, CarBahn’s software maintains the integrity of safety parameters, preserving them to prevent any compromise in engine performance and longevity. Parameters such as knock control sensitivity, super knocking control sensitivity, and catalyst thermal protection are carefully tuned within your OEM software to mitigate the risk of engine and catalyst failure. In our pursuit of optimizing power delivery, we have minimized power losses to a mere 12 HP when reducing these supposed power-reducing software protections. On the contrary, we have witnessed numerous instances of damaged engines resulting from the reduction of these safety parameters. Thus, it becomes apparent that gaining a marginal 12 HP advantage hardly justifies the potential risk of significant engine damage.

Do-it-yourself Approach:

It is essential to acknowledge the emergence of self-tuning tools in the automotive market. While these tools offer the convenience of tuning your vehicle independently, it is crucial to exercise caution. Many of these tools come equipped with pre-set programs that conveniently bypass safety limits, thus posing a substantial risk of engine damage. The art of tuning a high-output engine requires profound knowledge and experience to extract maximum power without compromising the engine’s structural integrity.

Emissions Legality:

Let us address the topic of removing the catalyst, commonly achieved through the utilization of downpipes. Our rigorous testing regimen involved conducting consecutive dyno runs with and without the catalyst, and the observed power gain was significantly smaller than commonly touted, typically around 11 HP. Nevertheless, it is important to acknowledge our shared responsibility towards environmental preservation, as clean air is vital to our well-being. Furthermore, obtaining the necessary emissions certifications without a catalyst is a daunting task and, from a legal standpoint, it is considered an infringement.

About Steve Dinan:

With an illustrious career spanning over four decades, Steve Dinan stands as an authority in streetcar turbo tuning. Under his leadership, our team has triumphed in three prototype racing championships and secured two overall victories at the esteemed 24 Hours of Daytona in collaboration with Chip Ganassi Racing. Steve Dinan’s unparalleled expertise solidifies our claim as the leading force in tuning high-performance engines.

Warranty Information:

* Registration with CarBahn at the time of purchase is required to maintain matching warranty coverage. CarBahn reserves the right to deny warranty program enrollment under certain conditions. Please contact us before making a purchase if you have any questions.

* The warranty is valid for U.S. and Canadian specification vehicles only. If your vehicle is currently covered by the vehicle manufacturer’s new car limited warranty, CarBahn products are warranted for the remaining term of the vehicle manufacturer’s new car limited warranty. The manufacturer’s new car warranty is limited to 4 years or 50,000 miles (80,000 kilometers in Canada), starting from the date of first retail sale or the date the vehicle is first placed in-service as a demonstrator or company vehicle, whichever is earlier. CarBahn warranties are transferable when ownership of the vehicle into which the CarBahn products were originally installed is sold. The warranty will repair or replace, without charge for parts or labor, the defective CarBahn component(s) as well as any original vehicle manufacturer component(s) directly affected by a CarBahn component, using new or authorized remanufactured parts. The decision to repair or replace said parts is at the sole discretion of CarBahn. Parts replaced under this limited warranty become the property of CarBahn. A reasonable period must be allowed for warranty repairs to be completed in all cases.

If your vehicle is outside of the vehicle manufacturer’s new car limited warranty, CarBahn will, at its sole discretion, repair or replace any defective CarBahn component for two (2) years from the original purchase date of the CarBahn product. This warranty does not include reimbursement for repairs to any original vehicle manufacturer component(s) that may have been affected by a CarBahn component.

* Warranty exclusions:

The following are not covered under the warranty: return shipping charges, towing charges, rental car fees, damage to a component or assembly due to the installation of replacement parts that materially differ from the original vehicle manufacturer or CarBahn parts, damage resulting from the unauthorized modification of a CarBahn part or assembly, damage resulting from the use of other manufacturer products in conjunction with CarBahn products or systems, damage to the clutch due to power shifting or abuse, brake rotor warp, friction materials, maintenance services and parts replaced during maintenance such as spark plugs, lubricants, fluids, engine tune-up parts, replacement of filters, coolant, and refrigerant, mechanical adjustments or repairs resulting from normal wear and tear, drive belts, light bulbs, damage due to the failure to perform maintenance services at the specified intervals or in accordance with the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn product instructions, damage attributable to negligence or abuse, improper installation, improper treatment or treatment contrary to the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn product instructions, engine damage resulting from alteration of CarBahn’s original boost pressure, damage resulting from the use of improper or contaminated fuel, damage occurring through corrosion resulting from weak or improper coolant, damage to a CarBahn component as a result of a collision or improper collision damage repairs, any vehicle operated in any competitive event or subjected to aggressive track conditions, custom-designed competition parts, damages resulting from loss of time, inconvenience or loss of the use of the vehicle, damage resulting from environmental influences, flood, accident, fire damage, or road salt corrosion, re-manufactured or refurbished products or components (these products are clearly identified as refurbished and are warranted for the specified period).

The Stage 1 Power package is safe and powerful. Combining the latest heat exchanger and software technology. CarBahn’s Heat exchanger increases OEM heat exchanger capacity by 40%! This heat exchanger uses F1 heat exchanger technology. This makes our heat exchanger dramatically more efficient than the lower cost heat exchangers on the market. The race car heat exchanger is also very light. Combined with CarBahn ST2 software provides large increase in power safely. Please watch the video in this link for more information.  CarBahn’s EVO intelligent software possesses remarkable adaptability to a large range of fuel octanes. Through our software, we employ retuning techniques while ensuring that all critical safety features, which are often neglected, remain intact and add additional safety features where necessary. To gain a deeper understanding of these safety limits, we invite you to watch the informative video available at this link. By recalibrating the safety limits, our software seamlessly adapts from 93 to 100 octane, eliminating the necessity for a customized tune when employing race gas. This unique functionality enables the software to deliver maximum power with each octane variant without compromise. Consequently, there is no need to purchase a custom tune exclusively for race gas usage. Our software is meticulously designed to provide the highest achievable performance output while upholding safety as a paramount concern. Here, the term “intelligent software” denotes the accurate and optimized tuning of the software, avoiding excessive tuning. Our objective is to craft a torque curve that maintains a natural and harmonious delivery, as showcased in this link. We avoid generating excessive torque at low RPMs, which could result in tire slippage, engine stress, and drivetrain failures. By managing torque with a smooth delivery, our software enhances drivability, thereby fostering increased speed and reliability. In contrast to our competitors, who often attempt to maximize performance by pushing boost levels beyond safe limits, our approach prioritizes reliability. We refrain from compromising knock sensitivity and thermal protections, which are vital for safeguarding the engine from potential damage caused by extreme power extraction.

Durability:

Unlike most tunes available in the market, CarBahn’s software maintains the integrity of safety parameters, preserving them to prevent any compromise in engine performance and longevity. Parameters such as knock control sensitivity, super knocking control sensitivity, and catalyst thermal protection are carefully tuned within your OEM software to mitigate the risk of engine and catalyst failure. In our pursuit of optimizing power delivery, we have minimized power losses to a mere 12 HP when reducing these supposed power-reducing software protections. On the contrary, we have witnessed numerous instances of damaged engines resulting from the reduction of these safety parameters. Thus, it becomes apparent that gaining a marginal 12 HP advantage hardly justifies the potential risk of significant engine damage.

Do-it-yourself Approach:

It is essential to acknowledge the emergence of self-tuning tools in the automotive market. While these tools offer the convenience of tuning your vehicle independently, it is crucial to exercise caution. Many of these tools come equipped with pre-set programs that conveniently bypass safety limits, thus posing a substantial risk of engine damage. The art of tuning a high-output engine requires profound knowledge and experience to extract maximum power without compromising the engine’s structural integrity.

Emissions Legality:

Let us address the topic of removing the catalyst, commonly achieved through the utilization of downpipes. Our rigorous testing regimen involved conducting consecutive dyno runs with and without the catalyst, and the observed power gain was significantly smaller than commonly touted, typically around 11 HP. Nevertheless, it is important to acknowledge our shared responsibility towards environmental preservation, as clean air is vital to our well-being. Furthermore, obtaining the necessary emissions certifications without a catalyst is a daunting task and, from a legal standpoint, it is considered an infringement.

About Steve Dinan:

With an illustrious career spanning over four decades, Steve Dinan stands as an authority in streetcar turbo tuning. Under his leadership, our team has triumphed in three prototype racing championships and secured two overall victories at the esteemed 24 Hours of Daytona in collaboration with Chip Ganassi Racing. Steve Dinan’s unparalleled expertise solidifies our claim as the leading force in tuning high-performance engines.

Warranty Information:

* Registration with CarBahn at the time of purchase is required to maintain matching warranty coverage. CarBahn reserves the right to deny warranty program enrollment under certain conditions. Please contact us before making a purchase if you have any questions.

* The warranty is valid for U.S. and Canadian specification vehicles only. If your vehicle is currently covered by the vehicle manufacturer’s new car limited warranty, CarBahn products are warranted for the remaining term of the vehicle manufacturer’s new car limited warranty. The manufacturer’s new car warranty is limited to 4 years or 50,000 miles (80,000 kilometers in Canada), starting from the date of first retail sale or the date the vehicle is first placed in-service as a demonstrator or company vehicle, whichever is earlier. CarBahn warranties are transferable when ownership of the vehicle into which the CarBahn products were originally installed is sold. The warranty will repair or replace, without charge for parts or labor, the defective CarBahn component(s) as well as any original vehicle manufacturer component(s) directly affected by a CarBahn component, using new or authorized remanufactured parts. The decision to repair or replace said parts is at the sole discretion of CarBahn. Parts replaced under this limited warranty become the property of CarBahn. A reasonable period must be allowed for warranty repairs to be completed in all cases.

If your vehicle is outside of the vehicle manufacturer’s new car limited warranty, CarBahn will, at its sole discretion, repair or replace any defective CarBahn component for two (2) years from the original purchase date of the CarBahn product. This warranty does not include reimbursement for repairs to any original vehicle manufacturer component(s) that may have been affected by a CarBahn component.

* Warranty exclusions:

The following are not covered under the warranty: return shipping charges, towing charges, rental car fees, damage to a component or assembly due to the installation of replacement parts that materially differ from the original vehicle manufacturer or CarBahn parts, damage resulting from the unauthorized modification of a CarBahn part or assembly, damage resulting from the use of other manufacturer products in conjunction with CarBahn products or systems, damage to the clutch due to power shifting or abuse, brake rotor warp, friction materials, maintenance services and parts replaced during maintenance such as spark plugs, lubricants, fluids, engine tune-up parts, replacement of filters, coolant, and refrigerant, mechanical adjustments or repairs resulting from normal wear and tear, drive belts, light bulbs, damage due to the failure to perform maintenance services at the specified intervals or in accordance with the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn product instructions, damage attributable to negligence or abuse, improper installation, improper treatment or treatment contrary to the instructions in the owner’s manual from the original vehicle manufacturer or CarBahn product instructions, engine damage resulting from alteration of CarBahn’s original boost pressure, damage resulting from the use of improper or contaminated fuel, damage occurring through corrosion resulting from weak or improper coolant, damage to a CarBahn component as a result of a collision or improper collision damage repairs, any vehicle operated in any competitive event or subjected to aggressive track conditions, custom-designed competition parts, damages resulting from loss of time, inconvenience or loss of the use of the vehicle, damage resulting from environmental influences, flood, accident, fire damage, or road salt corrosion, re-manufactured or refurbished products or components (these products are clearly identified as refurbished and are warranted for the specified period).

Derived from our GTD1 racing wheel, the Forgeline GT1 5-Lug brings its racing DNA to the street. The GT1 5-Lug combines the latest in advanced wheel technology, including one piece forged monoblock construction, motorsport engineered design, I-beamed spokes, and I-beamed spoke spans to deliver head-turning good looks with track-ready capability.

The Forgeline GT1 5-Lug is a fully-forged one-piece monoblock wheel that is manufactured using technology similar to our very successful GA1R wheel. The GT1 5-Lug’s concave 10-spoke design includes extra long spokes that extend beyond the hidden lug holes while allowing plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is very lightweight, extremely stiff, and has excellent fatigue strength. The GT1 5-Lug is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, 21, and 22-inch diameters. (Please Note: Depending on size, the GT1 5-Lug may be available in deep, medium, or shallow concave profiles.) And just like any Forgeline wheel, the GT1 5-Lug is available with fully customizable finish options.

• • One-Piece Monoblock Construction
  • Concave Profile
  • 10-Spoke Design
  • Extended Spoke Length
  • Hidden Lug Holes
  • I-Beamed Spoke Technology
  • I-Beamed Spoke Spans Along the Lip
  • Very Lightweight
  • Generous Brake Clearance
  • Forged 6061-T6 Aluminum
  • Customizable Finish Options
  • Legendary Forgeline Quality and Customer Service

The Forgeline GA1R is a fully-forged one-piece monoblock wheel that utilizes much of the technology and design of our very successful GA3R racing wheel, including our “I-beamed” spoke technology. The concave design of the GA1R not only looks great, but allows plenty of room for caliper clearance and extreme brake fitment, while the one-piece monoblock forging and I-beamed spoke design yield a wheel that is extremely stiff with fatigue strength equal to our proven GA3R. And yet despite the strength and stiffness, for most applications and sizes, it also delivers a high-performance weight reduction – making it perfect for motorsports and racing applications or the discerning street enthusiast who demands the ultimate in performance capability!

The GA1R is designed for racing. It is engineered with a 2100 lb. street-tire load rating (per wheel) to ensure strength and integrity, even when subjected to the massive loads encountered on the stickiest race tires.

The GA1R is produced using our traditional forging method from 6061-T6 aluminum. It is currently available in 18, 19, 20, 21, and 22-inch sizes with a range of widths and offsets. (Please Note: Depending on size, the GA1R may be available in deep, medium, or shallow concave profiles. See sizing chart for details.) And just like any Forgeline wheel, the GA1R is available with fully customizable finish options.

The GA1R is also available for limited applications in Deep Cap (DC) and Extra Deep Cap (EDC) profiles. These Deep Cap profiles employ unique in-house lathe turnings that allow us to position the center cap deep within the center of the wheel and create an exaggerated extra-aggressive concave look. This option is an excellent choice for select vehicles including the BMW M3, Nissan GT-R, ZL1 Camaro, C6 Z06 Corvette (rear only), and certain Porsche models (rear only).

• • One-Piece Monoblock Design
  • Concave Profile
  • Deep Cap (DC) and Extra Deep Cap (EDC) Options Available for Select Applications
  • I-Beamed Spoke Technology
  • Extreme Stiffness
  • Extreme Fatigue Strength
  • 2100 lb. Street-Tire Load Rating (per wheel)
  • Lightweight
  • Generous Brake Clearance
  • Forged 6061-T6 Aluminum
  • Includes Standard Aluminum Center Cap
  • Customizable Finish Options
  • Legendary Forgeline Quality and Customer Service

The AR1 is an exciting evolution in Forgeline monoblock styling, with a very angular split spoke pattern, extra-deep concave profile, and radically-chamfered outer edge. The fully-forged Forgeline AR1 one piece monoblock wheel utilizes manufacturing technology similar to the very successful GA1R wheel. Beyond just beautiful style, the AR1 is engineered to allow plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging, computer-simulated FEA design process, and I-beam spoke technology yield a wheel that is lightweight, stiff, and has excellent fatigue strength.

The Forgeline AR1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the AR1 may be available in deep, medium, or shallow concave profiles.)

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline AR1 one piece monoblock wheel set starts at $6600.00 depending on size and finish. To purchase this wheel set, please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Derived from the GTD1 racing wheel, the Forgeline GT1 5-Lug one piece monoblock wheel brings its racing DNA to the street. The GT1 5-Lug combines the latest in advanced wheel technology, including one piece forged monoblock construction, motorsport engineered design, I-beamed spokes, and I-beamed spoke spans to deliver head-turning good looks with track-ready capability.

The GT1 5-Lug is a fully-forged one-piece monoblock wheel that is manufactured using technology similar to the very successful GA1R wheel. The GT1 5-Lug’s concave 10-spoke design includes extra long spokes that extend beyond the hidden lug holes while allowing plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is very lightweight, extremely stiff, and has excellent fatigue strength.

The Forgeline GT1 5-Lug one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters. (Please Note: Depending on size, the GT1 5-Lug may be available in deep, medium, or shallow concave profiles.)

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline GT1 5-Lug one piece monoblock wheel set starts at $8400.00 depending on size and finish. To purchase a wheel set with a finish option other than those available above, please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

The RB1 is a fully-forged wheel that utilizes manufacturing technology similar to the very successful GA1R wheel. The Forgeline RB1 one piece monoblock wheel features a concave 10-spoke design with a subtle directional twist on each spoke, so each set includes unique left and right versions. The RB1 also utilizes Forgeline’s I-beam technology along each spoke and along the front lip between spokes to reduce mass and enhance strength & rigidity. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, extremely stiff, and has excellent fatigue strength.

The Forgeline RB1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the RB1 may be available in deep, medium, or shallow concave profiles.)

The Forgeline one piece monoblock RB1 is also available for limited applications in Deep Cap (DC) and Extra Deep Cap (EDC) profiles. These Deep Cap profiles employ unique in-house lathe turnings that allow us to position the center cap deep within the center of the wheel and create an exaggerated extra-aggressive concave look. This option is an excellent choice for select vehicles including the BMW M3 and certain Porsche models (rear only)

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline RB1 one piece monoblock wheel set starts at $6200.00 depending on size and finish. To purchase this wheel set, please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Please note, images are for representational purposes only. Actual product may vary.

The Forgeline MT1 continues the exciting evolution in Forgeline monoblock styling. It features a ten spoke mesh design, unique deeply-cut diamonds machined into the base of each spoke around the center of the wheel, deep concave profile, and radically-chamfered outer edge. The MT1 is a fully-forged one-piece monoblock wheel that utilizes manufacturing technology similar to our very successful GA1R wheel. Beyond just beautiful style, the Forgeline MT1 one piece monoblock wheel is engineered to allow plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, stiff, and has excellent fatigue strength.

The Forgeline MT1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the MT1 may be available in deep, medium, or shallow concave profiles.) Like any Forgeline wheel, the MT1 is available with fully customizable finish options.

One-Piece Forged Monoblock Construction
Concave Profile
Ten Spoke Mesh Design
Unique Diamond Pattern Machined Into Each Spoke Base
Strong Chamfered Machining Details
Lightweight
Generous Brake Clearance
Forged 6061-T6 Aluminum
Includes Standard Aluminum Center Cap
Customizable Finish Options
Legendary Forgeline Quality

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline MT1 one piece monoblock wheel set starts at $8400.00 depending on size and finish. To purchase a wheel set with a finish option other than shown above, please please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Please note, images are for representational purposes only. Actual product may vary.

The VX1 continues the exciting evolution in Forgeline monoblock styling. It features a sharp Y-spoke design (with long spokes that wrap around the lug holes), striking sharp angles, deep concave profile, and radically-chamfered outer edge. The Forgeline VX1 is a fully-forged one-piece monoblock wheel that utilizes manufacturing technology similar to our very successful GA1R wheel. Beyond just beautiful style, the Forgeline VX1 one piece monoblock wheel is engineered to allow plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, stiff, and has excellent fatigue strength.

The Forgeline VX1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, 21, and 22-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the VX1 may be available in deep, medium, or shallow concave profiles.)

One-Piece Forged Monoblock Construction
Concave Profile
Sharp Y-Spoke Design
Striking Sharp Angles
Strong Chamfered Machining Details
Lightweight
Generous Brake Clearance
Forged 6061-T6 Aluminum
Includes Standard Aluminum Center Cap
Customizable Finish Options
Legendary Forgeline Quality

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline VX1 one piece monoblock wheel set starts at $8400.00 depending on size and finish. To purchase a wheel set with a finish option other than those available above, please please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Please note, images are for representational purposes only. Actual product may vary.

Introducing the Carbahn License Plate Frame – the ultimate accessory to elevate your vehicle’s style and turn heads wherever you go. Crafted with premium materials and a sleek, modern design, this license plate frame is not just a functional necessity but a statement piece that tells other drivers that you have the best tuned car around.

Features:

• Premium Quality: Made from high-grade stainless steel, ensuring durability and a long-lasting shine that resists rust and corrosion.
• Sleek Design: Its minimalist, yet elegant design complements any car model, giving your vehicle a polished and sophisticated look.
• Easy Installation: Comes with all the necessary hardware for a quick and hassle-free installation, making it a perfect DIY project.
• Universal Fit: Designed to fit all standard US and Canadian license plates, ensuring compatibility with a wide range of vehicles.
• Customizable: Available in two finishes – matte black and brushed metal – so you can choose the one that best matches your car’s aesthetic.