CarBahn coil over kit is designed to maximize both ride and handling while keeping noise to a minimum. Our system is unique in that it incorporates spring perch isolators, a compact front spring design with extra space machined into the lower spring perch so you can fit the largest tires possible. Lowers car up to 1.25”.

The Crown Jewel to your Engine Bay

Inspired by BMW’s CSL Strut Brace, the CarBahn, Carbon Fiber Strut Brace is incredibly beautiful with carbon fiber beams and alloy end mounts. The brace creates a significantly more rigid chassis over factory. This added rigidity reduces flex in the front of the chassis making steering response quicker and improves handling by increasing the amount of force transmitted into the chassis by the shocks, spring and anti – roll bars. The reduced flex also increases chassis life by reducing chassis fatigue especially if the car is driven hard on a regular basis.

CarBahn Performance Controller (CPC):

The unit has selectable maps through a Bluetooth app on your smart phone. You can download these apps for your smartphone through the Apple App Store and the Google Play Store.

These maps are designed to accommodate different octane fuels for additional increased performance. You can choose between 91, 93 and 100 Octane. As with all CarBahn products an optional powertrain warranty can be purchased.

If you want to trade your CarBahn Performance Controller in for software in the future, there is a $250 upgrade fee and if you purchased the warranty, it is transferable to the software at no additional charge!

Emissions legality:

A note on down pipes (removing the catalyst). We have run back-to-back dyno runs with the cat on and off and the power gain is much smaller than most people claim usually around 11hp. We all need to breathe the air. It is difficult to get your car its required emissions test without catalyst and it is illegal.

About Steve Dinan: 

Steve Dinan has over 40 years of streetcar tuning experience. As an engine supplier we won 3 prototype racing championships and two overall wins at the 24hrs of Daytona partnering with Chip Ganassi Racing. No one know more about tuning high performance engines than Steve Dinan.

Warranty Information:

CarBahn Performance Controller (CPC):

The CPC is a plug and play ECU that increases boost pressure in turbocharged cars to dramatically increase HP and Torque. The unit has selectable maps through a Bluetooth app on your smart phone. You can download these apps for your smartphone through the Apple App Store and the Google Play Store.

These maps are designed to accommodate different octane fuels for additional increased performance. You can choose between 91, 93 and 100 Octane. As with all CarBahn products an optional powertrain warranty can be purchased.

If you want to trade your CarBahn Performance Controller in for software in the future, there is a $250 upgrade fee and if you purchased the warranty, it is transferable to the software at no additional charge!

Emissions legality:

A note on down pipes (removing the catalyst). We have run back-to-back dyno runs with the cat on and off and the power gain is much smaller than most people claim usually around 11hp. We all need to breathe the air. It is difficult to get your car its required emissions test without catalyst and it is illegal.

About Steve Dinan: 

Steve Dinan has over 40 years of streetcar tuning experience. As an engine supplier we won 3 prototype racing championships and two overall wins at the 24hrs of Daytona partnering with Chip Ganassi Racing. No one know more about tuning high performance engines than Steve Dinan.

Warranty Information:

The Stage 1 Power package is safe and powerful. Combining the latest heat exchanger technology. CarBahn’s Heat exchanger increases OEM heat exchanger capacity by 40%! This heat exchanger uses F1 heat exchanger technology. This makes our heat exchanger dramatically more efficient than the lower cost heat exchangers on the market. The race car heat exchanger is also very light. Combined with Performance controller and ST 2 software the St 1 PP is fast and durable. The CarBahn Performance Controller (CPC) is an easy-to-install electronic control unit (ECU) that significantly boosts the turbocharged cars’ horsepower and torque. This plug-and-play unit offers selectable maps, which can be accessed through a smartphone application via Bluetooth.

To access this app, you can download them from either the Apple App Store or the Google Play Store.

NOTE: This product is only compatible with Automatic Transmission equipped cars.

These maps are specifically designed to optimize performance based on different octane fuel levels. You have the flexibility to choose between 91, 93, and 100 octane options.

Additionally, CarBahn offers an optional powertrain warranty for all their products, including the CPC.

If you wish to switch from the CarBahn Performance Controller to software in the future, there is an upgrade fee of $250. However, if you have purchased a warranty, it can be transferred to the software upgrade at no additional charge!!

Emissions Legality:

Let us address the topic of removing the catalyst, commonly achieved through the utilization of downpipes. Our rigorous testing regimen involved conducting consecutive dyno runs with and without the catalyst, and the observed power gain was significantly smaller than commonly touted, typically around 11 HP. Nevertheless, it is important to acknowledge our shared responsibility towards environmental preservation, as clean air is vital to our well-being. Furthermore, obtaining the necessary emissions certifications without a catalyst is a daunting task and, from a legal standpoint, it is considered an infringement.

About Steve Dinan:

With an illustrious career spanning over four decades, Steve Dinan stands as an authority in streetcar turbo tuning. Under his leadership, our team has triumphed in three prototype racing championships and secured two overall victories at the esteemed 24 Hours of Daytona in collaboration with Chip Ganassi Racing. Steve Dinan’s unparalleled expertise solidifies our claim as the leading force in tuning high-performance engines.

Warranty Information:

Click here for all queries related to CarBahn Warranty.

The Stage 1 Power package is safe and powerful. Combining the latest heat exchanger and software technology. CarBahn’s Heat exchanger increases OEM heat exchanger capacity by 40%! This heat exchanger uses F1 heat exchanger technology. This makes our heat exchanger dramatically more efficient than the lower cost heat exchangers on the market. The race car heat exchanger is also very light. Combined with CarBahn ST2 software provides large increase in power safely. Please watch the video in this link for more information.  CarBahn’s EVO intelligent software possesses remarkable adaptability to a large range of fuel octanes. Through our software, we employ retuning techniques while ensuring that all critical safety features, which are often neglected, remain intact and add additional safety features where necessary. To gain a deeper understanding of these safety limits, we invite you to watch the informative video available at this link. By recalibrating the safety limits, our software seamlessly adapts from 93 to 100 octane, eliminating the necessity for a customized tune when employing race gas. This unique functionality enables the software to deliver maximum power with each octane variant without compromise. Consequently, there is no need to purchase a custom tune exclusively for race gas usage. Our software is meticulously designed to provide the highest achievable performance output while upholding safety as a paramount concern. Here, the term “intelligent software” denotes the accurate and optimized tuning of the software, avoiding excessive tuning. Our objective is to craft a torque curve that maintains a natural and harmonious delivery, as showcased in this link. We avoid generating excessive torque at low RPMs, which could result in tire slippage, engine stress, and drivetrain failures. By managing torque with a smooth delivery, our software enhances drivability, thereby fostering increased speed and reliability. In contrast to our competitors, who often attempt to maximize performance by pushing boost levels beyond safe limits, our approach prioritizes reliability. We refrain from compromising knock sensitivity and thermal protections, which are vital for safeguarding the engine from potential damage caused by extreme power extraction.

Durability:

Unlike most tunes available in the market, CarBahn’s software maintains the integrity of safety parameters, preserving them to prevent any compromise in engine performance and longevity. Parameters such as knock control sensitivity, super knocking control sensitivity, and catalyst thermal protection are carefully tuned within your OEM software to mitigate the risk of engine and catalyst failure. In our pursuit of optimizing power delivery, we have minimized power losses to a mere 12 HP when reducing these supposed power-reducing software protections. On the contrary, we have witnessed numerous instances of damaged engines resulting from the reduction of these safety parameters. Thus, it becomes apparent that gaining a marginal 12 HP advantage hardly justifies the potential risk of significant engine damage.

Do-it-yourself Approach:

It is essential to acknowledge the emergence of self-tuning tools in the automotive market. While these tools offer the convenience of tuning your vehicle independently, it is crucial to exercise caution. Many of these tools come equipped with pre-set programs that conveniently bypass safety limits, thus posing a substantial risk of engine damage. The art of tuning a high-output engine requires profound knowledge and experience to extract maximum power without compromising the engine’s structural integrity.

Emissions Legality:

Let us address the topic of removing the catalyst, commonly achieved through the utilization of downpipes. Our rigorous testing regimen involved conducting consecutive dyno runs with and without the catalyst, and the observed power gain was significantly smaller than commonly touted, typically around 11 HP. Nevertheless, it is important to acknowledge our shared responsibility towards environmental preservation, as clean air is vital to our well-being. Furthermore, obtaining the necessary emissions certifications without a catalyst is a daunting task and, from a legal standpoint, it is considered an infringement.

About Steve Dinan:

With an illustrious career spanning over four decades, Steve Dinan stands as an authority in streetcar turbo tuning. Under his leadership, our team has triumphed in three prototype racing championships and secured two overall victories at the esteemed 24 Hours of Daytona in collaboration with Chip Ganassi Racing. Steve Dinan’s unparalleled expertise solidifies our claim as the leading force in tuning high-performance engines.

Warranty Information:

Smooth Power Flash Tuner Stage 1 software F87 M2 (Non Competition)

Features:

The smooth power flash tuner can upload your stock file for safe keeping, read and clear faults. It can receive software updates from your PC emailed to you by CarBahn. These files can be free updates or increased performance tunes that to match hardware upgrades you purchase from CarBahn. The software comes with a two-year product warranty.

Philosophy:

CarBahn software is designed to deliver the highest safe output possible. Smooth Power means software tuned correctly, not over-tuned. We always try to make a natural torque curve, not excessive torque at low RPM that falls off rapidly at high RPM. Excessive torque will break the tires loose, break the engine and drivetrain. Managed torque with a smooth delivery makes the car easier to drive thereby faster and more reliable. Most if not all our competitor tunes attempt to run too much boost, resulting in active knock corrections which causes surging during acceleration. CarBahn software also incorporates torque reduction in 1st and 2nd gears for manageable power delivery.

Durability:

Most if not all tunes on the market except CarBahn reduce safety parameters in the software in an attempt to extract more power. These safety parameters such as knock control sensitivity, super knocking control sensitivity, and catalyst thermal protection are tuned into your OEM software to prevent engine and catalyst failure. When we reduced all the supposed power robbing software protections we lost less than 8 HP and 8 LB/FT Torque. We have seen many damaged engines as result of reducing these safety parameters! It hardly seems worth it for 8HP.

Doing it yourself:

A note on self-tuning tools. There are now programs available that you can buy to tune your car yourself. Many of these tools come with canned programs. Be careful as tuning a high output engine requires tremendous knowledge and experience to extract maximum power without damage.

Emissions legality:

A note on down pipes (removing the catalyst). We have run back to back dyno runs with the cat on and off and the power gain is much smaller than most people claim. We all need to breathe the air. Its difficult to get your car its required emissions test without catalyst and it’s illegal.

High boost with stock engine:

We have seen many damaged engines as result of making too much power with a stock engine. While modern engines are very reliable, it is easy to add large turbochargers and water methanol injection and break the engine.

About Steve Dinan:

Steve Dinan has over 40 years of street car turbo experience. As an engine supplier we won 3 prototype racing championships and two overall wins at the 24hrs of Daytona partnering with Chip Ganassi Racing. No one know more about tuning high performance engines than Steve Dinan.

Philosophy:

CarBahn’s EVO intelligent software possesses remarkable adaptability to a large range of fuel octanes. Through our software, we employ retuning techniques while ensuring that all critical safety features, which are often neglected, remain intact and add additional safety features where necessary. To gain a deeper understanding of these safety limits, we invite you to watch the informative video available at this link. By recalibrating the safety limits, our software seamlessly adapts from 93 to 100 octane, eliminating the necessity for a customized tune when employing race gas. This unique functionality enables the software to deliver maximum power with each octane variant without compromise. Consequently, there is no need to purchase a custom tune exclusively for race gas usage. Our software is meticulously designed to provide the highest achievable performance output while upholding safety as a paramount concern. Here, the term “intelligent software” denotes the accurate and optimized tuning of the software, avoiding excessive tuning. Our objective is to craft a torque curve that maintains a natural and harmonious delivery, as showcased in this link. We avoid generating excessive torque at low RPMs, which could result in tire slippage, engine stress, and drivetrain failures. By managing torque with a smooth delivery, our software enhances drivability, thereby fostering increased speed and reliability. In contrast to our competitors, who often attempt to maximize performance by pushing boost levels beyond safe limits, our approach prioritizes reliability. We refrain from compromising knock sensitivity and thermal protections, which are vital for safeguarding the engine from potential damage caused by extreme power extraction.

Durability:

Unlike most tunes available in the market, CarBahn’s software maintains the integrity of safety parameters, preserving them to prevent any compromise in engine performance and longevity. Parameters such as knock control sensitivity, super knocking control sensitivity, and catalyst thermal protection are carefully tuned within your OEM software to mitigate the risk of engine and catalyst failure. In our pursuit of optimizing power delivery, we have minimized power losses to a mere 12 HP when reducing these supposed power-reducing software protections. On the contrary, we have witnessed numerous instances of damaged engines resulting from the reduction of these safety parameters. Thus, it becomes apparent that gaining a marginal 12 HP advantage hardly justifies the potential risk of significant engine damage.

Do-it-yourself Approach:

It is essential to acknowledge the emergence of self-tuning tools in the automotive market. While these tools offer the convenience of tuning your vehicle independently, it is crucial to exercise caution. Many of these tools come equipped with pre-set programs that conveniently bypass safety limits, thus posing a substantial risk of engine damage. The art of tuning a high-output engine requires profound knowledge and experience to extract maximum power without compromising the engine’s structural integrity.

Emissions Legality:

Let us address the topic of removing the catalyst, commonly achieved through the utilization of downpipes. Our rigorous testing regimen involved conducting consecutive dyno runs with and without the catalyst, and the observed power gain was significantly smaller than commonly touted, typically around 11 HP. Nevertheless, it is important to acknowledge our shared responsibility towards environmental preservation, as clean air is vital to our well-being. Furthermore, obtaining the necessary emissions certifications without a catalyst is a daunting task and, from a legal standpoint, it is considered an infringement.

About Steve Dinan:

With an illustrious career spanning over four decades, Steve Dinan stands as an authority in streetcar turbo tuning. Under his leadership, our team has triumphed in three prototype racing championships and secured two overall victories at the esteemed 24 Hours of Daytona in collaboration with Chip Ganassi Racing. Steve Dinan’s unparalleled expertise solidifies our claim as the leading force in tuning high-performance engines.

Warranty Information:

The Stage 1 Power package is safe and powerful. Combining the latest heat exchanger and software technology. CarBahn’s Heat exchanger increases OEM heat exchanger capacity by 40%! This heat exchanger uses F1 heat exchanger technology. This makes our heat exchanger dramatically more efficient than the lower cost heat exchangers on the market. The race car heat exchanger is also very light. Combined with CarBahn ST2 software provides large increase in power safely. Please watch the video in this link for more information.  CarBahn’s EVO intelligent software possesses remarkable adaptability to a large range of fuel octanes. Through our software, we employ retuning techniques while ensuring that all critical safety features, which are often neglected, remain intact and add additional safety features where necessary. To gain a deeper understanding of these safety limits, we invite you to watch the informative video available at this link. By recalibrating the safety limits, our software seamlessly adapts from 93 to 100 octane, eliminating the necessity for a customized tune when employing race gas. This unique functionality enables the software to deliver maximum power with each octane variant without compromise. Consequently, there is no need to purchase a custom tune exclusively for race gas usage. Our software is meticulously designed to provide the highest achievable performance output while upholding safety as a paramount concern. Here, the term “intelligent software” denotes the accurate and optimized tuning of the software, avoiding excessive tuning. Our objective is to craft a torque curve that maintains a natural and harmonious delivery, as showcased in this link. We avoid generating excessive torque at low RPMs, which could result in tire slippage, engine stress, and drivetrain failures. By managing torque with a smooth delivery, our software enhances drivability, thereby fostering increased speed and reliability. In contrast to our competitors, who often attempt to maximize performance by pushing boost levels beyond safe limits, our approach prioritizes reliability. We refrain from compromising knock sensitivity and thermal protections, which are vital for safeguarding the engine from potential damage caused by extreme power extraction.

Durability:

Unlike most tunes available in the market, CarBahn’s software maintains the integrity of safety parameters, preserving them to prevent any compromise in engine performance and longevity. Parameters such as knock control sensitivity, super knocking control sensitivity, and catalyst thermal protection are carefully tuned within your OEM software to mitigate the risk of engine and catalyst failure. In our pursuit of optimizing power delivery, we have minimized power losses to a mere 12 HP when reducing these supposed power-reducing software protections. On the contrary, we have witnessed numerous instances of damaged engines resulting from the reduction of these safety parameters. Thus, it becomes apparent that gaining a marginal 12 HP advantage hardly justifies the potential risk of significant engine damage.

Do-it-yourself Approach:

It is essential to acknowledge the emergence of self-tuning tools in the automotive market. While these tools offer the convenience of tuning your vehicle independently, it is crucial to exercise caution. Many of these tools come equipped with pre-set programs that conveniently bypass safety limits, thus posing a substantial risk of engine damage. The art of tuning a high-output engine requires profound knowledge and experience to extract maximum power without compromising the engine’s structural integrity.

Emissions Legality:

Let us address the topic of removing the catalyst, commonly achieved through the utilization of downpipes. Our rigorous testing regimen involved conducting consecutive dyno runs with and without the catalyst, and the observed power gain was significantly smaller than commonly touted, typically around 11 HP. Nevertheless, it is important to acknowledge our shared responsibility towards environmental preservation, as clean air is vital to our well-being. Furthermore, obtaining the necessary emissions certifications without a catalyst is a daunting task and, from a legal standpoint, it is considered an infringement.

About Steve Dinan:

With an illustrious career spanning over four decades, Steve Dinan stands as an authority in streetcar turbo tuning. Under his leadership, our team has triumphed in three prototype racing championships and secured two overall victories at the esteemed 24 Hours of Daytona in collaboration with Chip Ganassi Racing. Steve Dinan’s unparalleled expertise solidifies our claim as the leading force in tuning high-performance engines.

Warranty Information:

Smooth Power Flash Stage 2 software F87 M2 (Non Competition)

Features:

The smooth power flash tuner can upload your stock file for safe keeping, read and clear faults. It can receive software updates from your PC emailed to you by CarBahn. These files can be free updates or increased performance tunes that to match hardware upgrades you purchase from CarBahn. The software comes with a two-year product warranty.

Philosophy:

CarBahn software is designed to deliver the highest safe output possible. Smooth Power means software tuned correctly, not over-tuned. We always try to make a natural torque curve, not excessive torque at low RPM that falls off rapidly at high RPM. Excessive torque will break the tires loose, break the engine and drivetrain. Managed torque with a smooth delivery makes the car easier to drive thereby faster and more reliable. Most if not all our competitor tunes attempt to run too much boost, resulting in active knock corrections which causes surging during acceleration. CarBahn software also incorporates torque reduction in 1st and 2nd gears for manageable power delivery.

Durability:

Most if not all tunes on the market except CarBahn reduce safety parameters in the software in an attempt to extract more power. These safety parameters such as knock control sensitivity, super knocking control sensitivity, and catalyst thermal protection are tuned into your OEM software to prevent engine and catalyst failure. When we reduced all the supposed power robbing software protections we lost less than 8 HP and 8 LB/FT Torque. We have seen many damaged engines as result of reducing these safety parameters! It hardly seems worth it for 8HP.

Doing it yourself:

A note on self-tuning tools. There are now programs available that you can buy to tune your car yourself. Many of these tools come with canned programs. Be careful as tuning a high output engine requires tremendous knowledge and experience to extract maximum power without damage.

Emissions legality:

A note on down pipes (removing the catalyst). We have run back to back dyno runs with the cat on and off and the power gain is much smaller than most people claim. We all need to breathe the air. Its difficult to get your car its required emissions test without catalyst and it’s illegal.

High boost with stock engine:

We have seen many damaged engines as result of making too much power with a stock engine. While modern engines are very reliable, it is easy to add large turbochargers and water methanol injection and break the engine.

About Steve Dinan:

Steve Dinan has over 40 years of street car turbo experience. As an engine supplier we won 3 prototype racing championships and two overall wins at the 24hrs of Daytona partnering with Chip Ganassi Racing. No one know more about tuning high performance engines than Steve Dinan.

Stage 1 Power Package – F87 M2 (N55), (Non-Competition)

Features:

The smooth power flash tuner can upload your stock file for safe keeping, read and clear faults. It can receive software updates from your PC emailed to you by CarBahn. These files can be free updates or increased performance tunes that to match hardware upgrades you purchase from CarBahn. The software comes with a two-year product warranty.

Philosophy:

CarBahn software is designed to deliver the highest safe output possible. Smooth Power means software tuned correctly, not over-tuned. We always try to make a natural torque curve, not excessive torque at low RPM that falls off rapidly at high RPM. Excessive torque will break the tires loose, break the engine and drivetrain. Managed torque with a smooth delivery makes the car easier to drive thereby faster and more reliable. Most if not all our competitor tunes attempt to run too much boost, resulting in active knock corrections which causes surging during acceleration. CarBahn software also incorporates torque reduction in 1st and 2nd gears for manageable power delivery.

Durability:

Most if not all tunes on the market except CarBahn reduce safety parameters in the software in an attempt to extract more power. These safety parameters such as knock control sensitivity, super knocking control sensitivity, and catalyst thermal protection are tuned into your OEM software to prevent engine and catalyst failure. When we reduced all the supposed power robbing software protections we lost less than 8 HP and 8 LB/FT Torque. We have seen many damaged engines as result of reducing these safety parameters! It hardly seems worth it for 8HP.

Doing it yourself:

A note on self-tuning tools. There are now programs available that you can buy to tune your car yourself. Many of these tools come with canned programs. Be careful as tuning a high output engine requires tremendous knowledge and experience to extract maximum power without damage.

Emissions legality:

A note on down pipes (removing the catalyst). We have run back to back dyno runs with the cat on and off and the power gain is much smaller than most people claim. We all need to breathe the air. Its difficult to get your car its required emissions test without catalyst and it’s illegal.

High boost with stock engine:

We have seen many damaged engines as result of making too much power with a stock engine. While modern engines are very reliable, it is easy to add large turbochargers and water methanol injection and break the engine.

About Steve Dinan:

Steve Dinan has over 40 years of street car turbo experience. As an engine supplier we won 3 prototype racing championships and two overall wins at the 24hrs of Daytona partnering with Chip Ganassi Racing. No one know more about tuning high performance engines than Steve Dinan.

CarBahn has produced the largest and most thermally efficient heat exchanger on the market. Increasing cooling capacity by 40%. This heat exchanger utilizes F1 heat exchanger technology. This heat exchanger technology is dramatically more efficient than the lower cost heat exchangers on the market. The race car heat exchanger is significantly lighter weight.

Increasing boost generates more heat. The addition of the heat exchanger allows you to run more boost safely by reducing charge air temperature. This reduction in charge air temperature also makes more power.  This is particularly noticeable in summer months when ambient temperatures are higher.

When used in conjunction with CarBahn software the addition of this heat exchanger provides enough safety that we can offer a factory matching warranty on your engine and drivetrain.

• Stepped core design for maximum surface area contact and internal intake air-flow volume. Largest drop-in fit intercooler available in the industry.
• Designed with 3D scanning / rapid prototype technology to ensure precise fitment and maximum surface area utilization. Lab tested on CSF in-house wind tunnel.
• Rounded front face bar/plate design for optimized airflow through the core.*
• Drop-in fit design for an easy & quick plug-and-play installation. Complete with OEM style Quick-Connect inlet/outlet connections.
• Fully reversible back to OEM spec with no modifications needed.
• Available in silver (#CBN55-2001) and matte black (#CBN55-2001B)
• Lifetime warranty.
• Fits the following applications.
• BMW F30, F32, F22, F87 M235i, M2, 328i, 428i, 335i, 435i, N55 intercooler
• ~40 *F drop in temperatures when compared to the OEM intercooler after multiple repeated runs.
• Power increase of 15-20 hp on stock cars, 25 hp on modified vehicles.

OEM# 17517600531 / 17517600530

• Stepped core design for maximum surface area contact and internal intake air-flow volume. Largest drop-in fit intercooler available in the industry.
• Designed with 3D scanning / rapid prototype technology to ensure precise fitment and maximum surface area utilization. Lab tested with an in-house wind tunnel.
• Rounded front face bar/plate design for optimized airflow through the core.*
• Drop-in fit design for an easy & quick plug-and-play installation. Complete with OEM style Quick-Connect inlet/outlet connections.
• Fully reversible back to OEM spec with no modifications needed.
• Available in silver (#CBN55-2001) and matte black (#CBN55-2001B)
• Lifetime warranty.
• Fits the following applications.
• BMW F30, F32, F22, F87 M235i, M2, 328i, 428i, 335i, 435i, N55 intercooler
• ~40 *F drop in temperatures when compared to the OEM intercooler after multiple repeated runs.
• Power increase of 15-20 hp on stock cars, 25 hp on modified vehicles.

OEM# 17517600531 / 17517600530

For the racing enthusiast or those just looking for the best, this is the ultimate upgrade to fully maximize the power output of your EWG N55engine. The compressor wheel inside theturbochargerisincreased in size allowing ~30% greater flow thusenabling additional boost pressures at higher engine speeds while retaining efficiency. These are fully cast turbos that are manufacturedto our specifications along with anupgraded thrust system over the stock turboto ensure reliable and prolonged life. In order to attain maximum advertised power gains these big turbos will need to be paired with Carbahn’s smooth power flashas well as our intercoolerto fully regulate the boost increase and deliver a polished product.

Benefits of the Carbahn High Performance Turbo for the EWG N55 Engine:

–Fully cast turbo that is manufactured to Carbahn specifications with an upgraded thrust system thereby avoiding lengthy turnaround times caused by a core exchange program.
–Larger billet compressor/impeller wheel that allows ~30% greater flow over stock which thenenablesadditional boost to be realizedwhile retaining efficiency.
– Turbo assembly is compatible with electric wastegate vehicles only. Use in conjuntion with CBN55-1001H (N55 Turbo Hardware Kit)
–Installation instructions detail a procedure which is quicker than BMW’s turbo replacement procedure saving the end-user money and time at the shop (Applicable to RWD vehicles only).
– 50 State Emissions legal

CarBahn S58 M2, M3 & M4 High Flow Replacement Intake Air Filters.

CarBahn high flow replacement air filters for your OEM airbox.  With less restriction and similar cleaning characteristics, these filters will increase the breathability of your high-performance engine. CarBahn measured a power gain of 10 HP.

Carbahn high flow replacement air filter for your OEM airbox.  With less restriction and similar cleaning characteristics, this filter will increase the breathability of your high-performance engine.  CarBahn measured a power gain of 7 hp.

CarBahn Cold air intake consists of a Carbon Fiber Airbox Lid replacement for OEM airbox lid to reduce weight and add visual appeal to the engine bay and a high flow filter. The high flow filter increases power between 7-15hp depending on boost pressure and application.

CarBahn CAI is completely sealed like the OEM system, so no power is lost from hot air leaking into the intake like most aftermarket systems that are designed for style and noise, not function.

Carbahn’s EVM (Exhaust Valve Module) allows you to open the factory exhaust flaps of your car 100% at all times by pressing “Open” (Button 1) on the remote control. If you wish to revert to factory settings, press “Stock” (Button 2) on the remote control.  Works with all F and G series cars.

• User Activation is independent of vehicle drive mode
  • Override your cars factory exhaust flap setting with the push of a button.
• EVM does not engage with CAN-Bus
  • No interference with any control units, No Check Engine Lights
  • Factory Software updates do not interfere with the functionality of the EVM.
• Plug and Play with vehicle original exhaust valve plugs
  • No cutting wires, no damage to factory cables, no exposed connectors, fully reversible.
• Waterproof module for mounting underneath vehicle

Electrical pulses to the spark plugs are what ignite the raw fuel in each cylinder, and with forced induction engines having increased pressure per cylinder, a consistent and reliable pulse and electrical spark are critical for optimal fuel burn, in turn, making horsepower.

Stay on top of unwanted misfires and unburned fuel with high performance replacement ignition coils for your high performing engine.

This product is a direct or consolidated replacement part from the manufacturers application guide which is legal for sale and use on emissions controlled vehicles.

Replaces OEM p/n: 12-13-8-611-236, 12138616153, 12138647689, 12138611236, 12138657273, 12120039634, 12120039664, 12130148594, 12130148594, 12131712219, 12137575010, 12137594596, 12137594937, 12137594938, 0.022150447

CarBahn is proud to announce the Caster Adjuster Assembly for the F8X M3, M4 and M2 Competition models. The CarBahn Caster Adjuster Assembly replaces the rubber bushings in the stock thrust arms with sealed precision ball joints inside machined aluminum housings. As a result of eliminating the deflection that is inherent in rubber bushings, braking stability is improved, and the tendency for the car to follow ruts in the road (especially with wider wheels and tires) is reduced. As an added benefit, the bearings are mounted eccentrically to give approximately 2.1 degrees of adjustable caster range. Unlike most other bearings on the market, the bearings inside the Caster Adjuster are nylon-lined for quiet operation, and are sealed against water and debris intrusion for longevity.

CarBahn Autoworks is proud to present the much-awaited High-Performance Coil-Over Suspension System for the F87 M2, M2 Competition Coupe & M2 CS Coupe models.

Benefits of CarBahn Autoworks’ Performance Coil-Over Suspension System:

The CarBahn KW Variant 3: Race technology for the road, with adjustable compression and rebound dampening. This suspension is unique when compared to the standard KW Variant 3.

• The CarBahn KW suspension has stiffer front springs for support with bigger front tires and more negative camber.
• The rear spring is one piece to reduce noise and improve rear traction when vehicle is cornering hard, and you are trying to accelerate.
• Spring perches have rubber isolators to reduce road noise
• CarBahn has optional front control arm bearing
• CarBahn has optional high performance rear toe links
• Threaded collars allow easy and precise front & rear vehicle height adjustments.
• Up to 1.80″ of lowering is possible depending on tire clearance.
• Included suspension packers allow adjustment of bump-stop clearance to fine-tune handling and comfort.
• CarBahn-spec progressive bump stops improve ride quality at lowered ride heights.

*Note: Due to the extensive lowering possible, and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. CarBahn is not responsible for any property damage or injury.

Serious drivers will appreciate the ride, traction and control that is bestowed upon the vehicle from the improved suspension.

Estimated Installation Time: 10.00 hours (Includes ride height adjustment and excludes alignment)

CarBahn has developed a Toe Link Kit for the F8x M2, M3 & M4 and the G8X M3 & M4 designed to add precision and predictability at the limit.

The Stock Rear Toe Link and Stock Rear Lower Trailing Arm are built with rubber bushings causing excessive deflection. During hard acceleration, these arms flex and allow the rear wheels to have excessive geometry changes. All this flex in the stock suspension links cause the car to be unstable when cornering and pushing on the limits of acceleration. CarBahn eliminates this flex by replacing the rubber bushings with Teflon coated machined steel rod ends.

Most, if not all, of our competitors’ products wrap the rod end in a loose rubber boot, which not only allows to enter but also retain the water and debris which results in excessive noise and a short service life until the rod ends have to be replaced. The CarBahn rod ends are sealed perfectly against water and environmental contamination, thus providing a long, quiet, maintenance-free service life.

The CarBahn rod ends are sealed perfectly against water and environmental contamination, thus providing a long, quiet, maintenance-free service life.

CarBahn is proud to announce the Mono-ball for the G8X BMW M2, M3, M4 models.

The CarBahn Monoball Kit replaces the rubber bushings in the stock thrust arms with sealed precision ball joints inside machined aluminum housings. As a result of eliminating the deflection that is inherent in rubber bushings, braking stability is improved, and the tendency for the car to follow ruts in the road (especially with wider wheels and tires) is reduced. The bearings inside the Monoball Assembly are nylon-lined for quiet operation and are sealed against water and debris intrusion for longevity.

CarBahn is proud to announce the Monoball for the G8X BMW M2, M3, M4 models.

The CarBahn Monoball Kit replaces the rubber bushings in the stock thrust arms with sealed precision ball joints inside machined aluminum housings. As a result of eliminating the deflection that is inherent in rubber bushings, braking stability is improved, and the tendency for the car to follow ruts in the road (especially with wider wheels and tires) is reduced. The bearings inside the Monoball Assembly are nylon-lined for quiet operation and are sealed against water and debris intrusion for longevity.

When tracking a car with a high performance suspension and R compound tires will often overload the OEM eccentric adjuster causing it to slip. This is especially true when you hit racing curbs at high speed on a track day.  

When you install our rear toe link adjusters you no longer need the factory eccentric adjuster. This provides the opportunity to lock those adjusters so the alignment will stay put when driving on the track. We highly recommend this option when purchasing our toe link kit if you are going to partake in track days. 

⚠️ This kit ONLY works in conjunction with our Toe Link Kit, CBF82-3123 and cannot be used with stock toe links!

Upgrade your BMW M2/M3/M4 aesthetics with our carbon fiber engine covers. Crafted to perfection, these covers seamlessly replace the OEM counterpart, adding a sleek and sporty touch to your engine bay. Elevate your BMW experience with our premium carbon fiber engine covers. 

– BMW M Badge not included.

CarBahn Part#: CBB04-00-8980

Carbahn Gloss Carbon Fiber Rear Spoiler for the BMW M2 (2015-21.)  Aggressive looks, and enhanced performance. Made from high quality, light weight carbon fiber.  Improve the appearance of your M car with tasteful lines to stand out from the crowd. 

When designing this new cooler, CSF wanted to ensure the best possible performance with factory like fitment. This oil cooler is a truly unique design using CSF’s AC Condenser Technology. The 1-Row Super-High Pressure 16mm 9-Channel Microtube provides optimal oil flow and maximum surface area contact.

By keeping the factory mounting location and relative dimensions, the factory ducting, and shrouds are all reused with no modifications necessary. In addition, CSF added a removable/replaceable rock guard to keep the cooler safe.

• 8 mm Tall Multi-Louvered Fin vs. OEM 6mm
• Made with CSF’s AC Condenser Technology Using a 1-Row Super-High Pressure 32 mm 10-Channel Microtube for Optimal Oil Flow and Maximum Surface Area Contact
• Utilizes OEM Top/Bottom Rubber Seals for Optimal Airflow
• OEM Style Inlet/Outlet Connections
• Drop-in Fit Requires No Modifications to Install
• 2-Year Limited Warranty
• Ideal for Road Racing, Drag Racing, and Vehicles with Increased Performance and/or Transmission Tuning
• BMW: 17 11 8 095 293
• BMW: 17 21 8 095 297
• Lifetime Warranty

Design, Development, and Testing

While the OEM Transmission Cooler is adequate for the G8X in stock form, it starts to come up a bit short on modified/tuned vehicles. Specifically ones that see heavy track/competition use. Transmission oil temperatures have a major impact on the shifting performance of your automatic transmission. If the fluid passes optimal temperatures you will start to see some delays in shifting. Sluggish shifting can be quite frustrating, but the real concern is the damage that can be done to the transmission when temperatures get too high. There are often cases where drivers don’t notice the change in shifting performance due to the gradual onset, but the damage is still being done slowly on a very expensive and important component.

By changing from the OEM single core design to a dual core, CSF was able to increase the overall volume by 194%. This design offers a drastic improvement in heat dissipation and increases the fluid capacity of the coolers by ~94%. Utilizing CSF’s AC Condenser Technology, a 1-Row Super-High Pressure 16mm 9-Channel Microtube design optimizes oil flow and offers maximum surface area contact. These features combine to offer the best possible heat dissipation from the system.

Rock Guard

CSF knows the kind of punishment the front of a car can take on or off the track. The wrong bit of debris flying through the front grille can quickly punch a hole in a cooler. Because the Transmission cooler sits at the very front of the center cooling stack, it is quite vulnerable to damage. In addition, “open face” race style grilles have become quite popular on the G8X. These grilles can add to the risk of debris passing through.

The CarBahn engine is both stronger and less expensive than the BMW OEM factory engine. The S58 CarBahn engine is designed to improve the strength of your engine if you are tuning your car. Connecting rods are replaced with Carrillo forged racing rods. Pistons are CP forged racing pistons. The engine also comes with high performance valve springs for increased boost. The engine is a complete overhaul with blue printing and balancing. This engine is designed for an increase in torque of 50% over stock.

Steve Dinan’s engine shop has been building racing engines for 43 years. Those engines have won many championships including three prototype racing championships including 2 overall wins in the 24hrs of Daytona in 2011-2013. You will not find a higher quality engine. All engines are backed with a two-year warranty.

Engine core acceptance parameters

Must be complete core (factory engine, from oil pan to valve cover)

• Block must have no:
  • Holes or cracks in casting
  • Holes or crack in covers
  • Bore damage that cannot be honed out
  • Thrust surface damage
  • Journal surfaces damage
  • Bolt hole damage that can’t be repaired
• Heads must have no:
  • Holes or cracks in casting
  • Holes or crack in covers
  • Thrust surface damage
  • Journal surfaces damage
  • Bolt hole damage that can’t be repaired
• Additional repair charges could apply for damaged items that are not normally changed during an overhaul and cannot be repaired or serviced
  • Valves
  • Crankshafts
  • Camshafts
  • Guides
  • ValveTronic mechanism
  • Vanos mechanism

The CarBahn engine is both stronger and less expensive than the BMW OEM factory engine. The N55 CarBahn engine is designed to improve the strength of your engine if you are tuning your car. Connecting rods are replaced with Carrillo forged racing rods, pistons are CP forged racing pistons, CarBahn Pined crankshaft, full circle thrust main bearing and performance valve springs for increased boost pressure. The engine is a complete overhaul with blue printing and balancing. All engines are backed with a two-year warranty. This engine is designed for an increase in torque of 50% over stock

The N55 engine is not designed to take a large increase in boost beyond the OEM spec. Due to the design of the crankshaft, it is known to have the timing chain sprocket spin on the end of the crankshaft, causing the cams to go out of time. In extreme cases, the valves can hit the pistons, causing catastrophic damage. Furthermore, the N55 only has half of a normal crankshaft thrust bearing. To ensure durability we pin the timing chain sprocket to the crankshaft, machine the block to accommodate a full circle thrust main. All engines are backed with a two-year warranty.

CarBahn History

Steve Dinan’s engine shop has been building high performance and racing engines for BMW s since 1977, winning 12 racing championships including 3 prototype championships and two 24 Hours of Daytona. The same engine shop that builds the racing engines also builds the street car engines; these talented engineers, machinists, and builders have built hundreds of engines from OEM street rebuilds to full-blown racing engines.

Engine core acceptance parameters

Must be complete core (factory engine, from oil pan to valve cover)

• Block must have no:
  • Holes or cracks in casting
  • Holes or crack in covers
  • Bore damage that cannot be honed out
  • Thrust surface damage
  • Journal surfaces damage
  • Bolt hole damage that can’t be repaired
• Heads must have no:
  • Holes or cracks in casting
  • Holes or crack in covers
  • Thrust surface damage
  • Journal surfaces damage
  • Bolt hole damage that can’t be repaired
• Additional repair charges could apply for damaged items that are not normally changed during an overhaul and cannot be repaired or serviced
  • Valves
  • Crankshafts
  • Camshafts
  • Guides
  • ValveTronic mechanism
  • Vanos mechanism

The stock engine compression ratio is relatively high due to the Corporate Average Fuel Economy (CAFE) standards which push for consistently higher fuel economy in cars and trucks. However, this increased compression limits engine performance with higher boost settings by decreasing the size of the fuel-air charge in the combustion chamber, forcing the ignition timing to retard far below MBT (mean best timing, the theoretical optimal ignition timing). Therefore, the Carbahn N55 engine has 0.5 less compression to optimize the engine for the increased boost. 

The CarBahn engine is both stronger and less expensive than the BMW OEM factory engine. The N55 CarBahn engine is designed to improve the strength of your engine if you are tuning your car. Connecting rods are replaced with Carrillo forged racing rods, pistons are CP forged racing pistons, CarBahn Pined crankshaft, full circle thrust main bearing and performance valve springs for increased boost pressure. The engine is a complete overhaul with blue printing and balancing.  This engine is designed for an increase in torque of 100% over stock

The N55 engine is not designed to take a large increase in boost beyond the OEM spec. Due to the design of the crankshaft, it is known to have the timing chain sprocket spin on the end of the crankshaft, causing the cams to go out of time. In extreme cases, the valves can hit the pistons, causing catastrophic damage. Furthermore, the N55 only has half of a normal crankshaft thrust bearing. To ensure durability we pin the timing chain sprocket to the crankshaft, machine the block to accommodate a full circle thrust main.

CarBahn History

Steve Dinan’s engine shop has been building high performance and racing engines for BMW s since 1977, winning 12 racing championships including 3 prototype championships and two 24 Hours of Daytona. The same engine shop that builds the racing engines also builds the street car engines; these talented engineers, machinists, and builders have built hundreds of engines from OEM street rebuilds to full-blown racing engines.You will not find a higher quality engine. All engines are backed with a two-year warranty.

Engine core acceptance parameters

Must be complete core (factory engine, from oil pan to valve cover)

• Block must have no:
  • Holes or cracks in casting
  • Holes or crack in covers
  • Bore damage that cannot be honed out
  • Thrust surface damage
  • Journal surfaces damage
  • Bolt hole damage that can’t be repaired
• Heads must have no:
  • Holes or cracks in casting
  • Holes or crack in covers
  • Thrust surface damage
  • Journal surfaces damage
  • Bolt hole damage that can’t be repaired
• Additional repair charges could apply for damaged items that are not normally changed during an overhaul and cannot be repaired or serviced
  • Valves
  • Crankshafts
  • Camshafts
  • Guides
  • ValveTronic mechanism
  • Vanos mechanism

The stock engine compression ratio is relatively high due to the Corporate Average Fuel Economy (CAFE) standards which push for consistently higher fuel economy in cars and trucks. However, this increased compression limits engine performance with higher boost settings by decreasing the size of the fuel-air charge in the combustion chamber, forcing the ignition timing to retard far below MBT (mean best timing, the theoretical optimal ignition timing). Therefore, the Carbahn S58 engine has 0.5 less compression to optimize the engine for the increased boost. 

The CarBahn engine is both stronger and less expensive than the BMW OEM factory engine. The S58 CarBahn engine is designed to improve the strength of your engine if you are tuning your car. Connecting rods are replaced with Carrillo forged racing rods. Pistons are CP forged racing pistons. The engine also comes with ported cylinder head and high-performance valve springs for ultra-high boost pressures. The engine is a complete overhaul with blue printing and balancing. This engine is designed for an increase in torque of 100% over stock.

Steve Dinan’s engine shop has been building racing engines for 43 years. Those engines have won many championships including three prototype racing championships including 2 overall wins in the 24hrs of Daytona in 2011-2013. You will not find a higher quality engine. All engines are backed with a two-year warranty.

Derived from our GTD1 racing wheel, the Forgeline GT1 5-Lug brings its racing DNA to the street. The GT1 5-Lug combines the latest in advanced wheel technology, including one piece forged monoblock construction, motorsport engineered design, I-beamed spokes, and I-beamed spoke spans to deliver head-turning good looks with track-ready capability.

The Forgeline GT1 5-Lug is a fully-forged one-piece monoblock wheel that is manufactured using technology similar to our very successful GA1R wheel. The GT1 5-Lug’s concave 10-spoke design includes extra long spokes that extend beyond the hidden lug holes while allowing plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is very lightweight, extremely stiff, and has excellent fatigue strength. The GT1 5-Lug is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, 21, and 22-inch diameters. (Please Note: Depending on size, the GT1 5-Lug may be available in deep, medium, or shallow concave profiles.) And just like any Forgeline wheel, the GT1 5-Lug is available with fully customizable finish options.

• • One-Piece Monoblock Construction
  • Concave Profile
  • 10-Spoke Design
  • Extended Spoke Length
  • Hidden Lug Holes
  • I-Beamed Spoke Technology
  • I-Beamed Spoke Spans Along the Lip
  • Very Lightweight
  • Generous Brake Clearance
  • Forged 6061-T6 Aluminum
  • Customizable Finish Options
  • Legendary Forgeline Quality and Customer Service

The Forgeline GA1R is a fully-forged one-piece monoblock wheel that utilizes much of the technology and design of our very successful GA3R racing wheel, including our “I-beamed” spoke technology. The concave design of the GA1R not only looks great, but allows plenty of room for caliper clearance and extreme brake fitment, while the one-piece monoblock forging and I-beamed spoke design yield a wheel that is extremely stiff with fatigue strength equal to our proven GA3R. And yet despite the strength and stiffness, for most applications and sizes, it also delivers a high-performance weight reduction – making it perfect for motorsports and racing applications or the discerning street enthusiast who demands the ultimate in performance capability!

The GA1R is designed for racing. It is engineered with a 2100 lb. street-tire load rating (per wheel) to ensure strength and integrity, even when subjected to the massive loads encountered on the stickiest race tires.

The GA1R is produced using our traditional forging method from 6061-T6 aluminum. It is currently available in 18, 19, 20, 21, and 22-inch sizes with a range of widths and offsets. (Please Note: Depending on size, the GA1R may be available in deep, medium, or shallow concave profiles. See sizing chart for details.) And just like any Forgeline wheel, the GA1R is available with fully customizable finish options.

The GA1R is also available for limited applications in Deep Cap (DC) and Extra Deep Cap (EDC) profiles. These Deep Cap profiles employ unique in-house lathe turnings that allow us to position the center cap deep within the center of the wheel and create an exaggerated extra-aggressive concave look. This option is an excellent choice for select vehicles including the BMW M3, Nissan GT-R, ZL1 Camaro, C6 Z06 Corvette (rear only), and certain Porsche models (rear only).

• • One-Piece Monoblock Design
  • Concave Profile
  • Deep Cap (DC) and Extra Deep Cap (EDC) Options Available for Select Applications
  • I-Beamed Spoke Technology
  • Extreme Stiffness
  • Extreme Fatigue Strength
  • 2100 lb. Street-Tire Load Rating (per wheel)
  • Lightweight
  • Generous Brake Clearance
  • Forged 6061-T6 Aluminum
  • Includes Standard Aluminum Center Cap
  • Customizable Finish Options
  • Legendary Forgeline Quality and Customer Service

The striking NW101 continues the exciting evolution in Forgeline monoblock design. It delivers cutting-edge styling with five multi-dimensional split spokes that span integrated lug holes and strong chamfered edges. And the NW101’s relatively open spoke pattern is perfect for showing off the sexy giant brakes that are found on most serious modern performance vehicles.

The NW101 is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, 21, and 22-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the NW101 may be available in deep, medium, or shallow concave profiles.) And just like any Forgeline wheel, the NW101 is available with fully customizable finish options.

• • Custom Made-to-Order for Each Customer and Each Unique Vehicle Application
  • One-Piece Forged Monoblock Construction
  • Precision Machined from Forged 6061-T6 Aluminum
  • Concave Profile
  • Five Multi-Dimensional Split Spokes Span Integrated Lug Holes
  • Open Spoke Pattern Compliments Giant Modern Brakes
  • Strong Chamfered Machining Details
  • Generous Brake Clearance
  • Includes Standard Aluminum Center Cap
  • Customizable Finish Options
  • Legendary Forgeline Quality and Customer Service

The AR1 is an exciting evolution in Forgeline monoblock styling, with a very angular split spoke pattern, extra-deep concave profile, and radically-chamfered outer edge. The fully-forged Forgeline AR1 one piece monoblock wheel utilizes manufacturing technology similar to the very successful GA1R wheel. Beyond just beautiful style, the AR1 is engineered to allow plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging, computer-simulated FEA design process, and I-beam spoke technology yield a wheel that is lightweight, stiff, and has excellent fatigue strength.

The Forgeline AR1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the AR1 may be available in deep, medium, or shallow concave profiles.)

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline AR1 one piece monoblock wheel set starts at $6600.00 depending on size and finish. To purchase this wheel set, please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Derived from the GTD1 racing wheel, the Forgeline GT1 5-Lug one piece monoblock wheel brings its racing DNA to the street. The GT1 5-Lug combines the latest in advanced wheel technology, including one piece forged monoblock construction, motorsport engineered design, I-beamed spokes, and I-beamed spoke spans to deliver head-turning good looks with track-ready capability.

The GT1 5-Lug is a fully-forged one-piece monoblock wheel that is manufactured using technology similar to the very successful GA1R wheel. The GT1 5-Lug’s concave 10-spoke design includes extra long spokes that extend beyond the hidden lug holes while allowing plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is very lightweight, extremely stiff, and has excellent fatigue strength.

The Forgeline GT1 5-Lug one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters. (Please Note: Depending on size, the GT1 5-Lug may be available in deep, medium, or shallow concave profiles.)

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline GT1 5-Lug one piece monoblock wheel set starts at $8400.00 depending on size and finish. To purchase a wheel set with a finish option other than those available above, please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

The RB1 is a fully-forged wheel that utilizes manufacturing technology similar to the very successful GA1R wheel. The Forgeline RB1 one piece monoblock wheel features a concave 10-spoke design with a subtle directional twist on each spoke, so each set includes unique left and right versions. The RB1 also utilizes Forgeline’s I-beam technology along each spoke and along the front lip between spokes to reduce mass and enhance strength & rigidity. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, extremely stiff, and has excellent fatigue strength.

The Forgeline RB1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the RB1 may be available in deep, medium, or shallow concave profiles.)

The Forgeline one piece monoblock RB1 is also available for limited applications in Deep Cap (DC) and Extra Deep Cap (EDC) profiles. These Deep Cap profiles employ unique in-house lathe turnings that allow us to position the center cap deep within the center of the wheel and create an exaggerated extra-aggressive concave look. This option is an excellent choice for select vehicles including the BMW M3 and certain Porsche models (rear only)

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline RB1 one piece monoblock wheel set starts at $6200.00 depending on size and finish. To purchase this wheel set, please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Please note, images are for representational purposes only. Actual product may vary.

The Forgeline MT1 continues the exciting evolution in Forgeline monoblock styling. It features a ten spoke mesh design, unique deeply-cut diamonds machined into the base of each spoke around the center of the wheel, deep concave profile, and radically-chamfered outer edge. The MT1 is a fully-forged one-piece monoblock wheel that utilizes manufacturing technology similar to our very successful GA1R wheel. Beyond just beautiful style, the Forgeline MT1 one piece monoblock wheel is engineered to allow plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, stiff, and has excellent fatigue strength.

The Forgeline MT1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the MT1 may be available in deep, medium, or shallow concave profiles.) Like any Forgeline wheel, the MT1 is available with fully customizable finish options.

One-Piece Forged Monoblock Construction
Concave Profile
Ten Spoke Mesh Design
Unique Diamond Pattern Machined Into Each Spoke Base
Strong Chamfered Machining Details
Lightweight
Generous Brake Clearance
Forged 6061-T6 Aluminum
Includes Standard Aluminum Center Cap
Customizable Finish Options
Legendary Forgeline Quality

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline MT1 one piece monoblock wheel set starts at $8400.00 depending on size and finish. To purchase a wheel set with a finish option other than shown above, please please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Please note, images are for representational purposes only. Actual product may vary.

The VX1 continues the exciting evolution in Forgeline monoblock styling. It features a sharp Y-spoke design (with long spokes that wrap around the lug holes), striking sharp angles, deep concave profile, and radically-chamfered outer edge. The Forgeline VX1 is a fully-forged one-piece monoblock wheel that utilizes manufacturing technology similar to our very successful GA1R wheel. Beyond just beautiful style, the Forgeline VX1 one piece monoblock wheel is engineered to allow plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, stiff, and has excellent fatigue strength.

The Forgeline VX1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, 21, and 22-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the VX1 may be available in deep, medium, or shallow concave profiles.)

One-Piece Forged Monoblock Construction
Concave Profile
Sharp Y-Spoke Design
Striking Sharp Angles
Strong Chamfered Machining Details
Lightweight
Generous Brake Clearance
Forged 6061-T6 Aluminum
Includes Standard Aluminum Center Cap
Customizable Finish Options
Legendary Forgeline Quality

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline VX1 one piece monoblock wheel set starts at $8400.00 depending on size and finish. To purchase a wheel set with a finish option other than those available above, please please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Please note, images are for representational purposes only. Actual product may vary.

Introducing the Carbahn License Plate Frame – the ultimate accessory to elevate your vehicle’s style and turn heads wherever you go. Crafted with premium materials and a sleek, modern design, this license plate frame is not just a functional necessity but a statement piece that tells other drivers that you have the best tuned car around.

Features:

• Premium Quality: Made from high-grade stainless steel, ensuring durability and a long-lasting shine that resists rust and corrosion.
• Sleek Design: Its minimalist, yet elegant design complements any car model, giving your vehicle a polished and sophisticated look.
• Easy Installation: Comes with all the necessary hardware for a quick and hassle-free installation, making it a perfect DIY project.
• Universal Fit: Designed to fit all standard US and Canadian license plates, ensuring compatibility with a wide range of vehicles.
• Customizable: Available in two finishes – matte black and brushed metal – so you can choose the one that best matches your car’s aesthetic.