Smooth Power Flash Tuner Stage 1 software for W205 Mercedes-AMG

Features: The smooth power flash tuner can upload your stock file for safe keeping, read and clear faults. It can receive software updates from your PC emailed to you by CarBahn. These files can be free updates or increased performance tunes that to match hardware upgrades you purchase from CarBahn. The software comes with a two-year product warranty.

Philosophy: CarBahn software is designed to deliver the highest safe output possible. Smooth power means software tuned correctly, not over-tuned. We always try to make a natural torque curve, not excessive torque at low RPM that falls off rapidly at high RPM. Excessive torque will break the tires loose, break the engine and drivetrain. Managed torque with a smooth delivery makes the car easier to drive thereby faster and more reliable. Most, if not all of our competitor tunes attempt to run too much boost, resulting in active knock corrections which causes surging during acceleration.

Durability: Most if not all tunes on the market except CarBahn reduce safety parameters in the software in an attempt to extract more power. These safety parameters such as knock control sensitivity, super knocking control sensitivity, and catalyst thermal protection are tuned into your OEM software to prevent engine and catalyst failure. When we reduced all the supposed power robbing software protections, we lost less than 8 HP and 8 LB/FT Torque. We have seen many damaged engines as result of reducing these safety parameters! It hardly seems worth it for 8HP.

Doing it yourself: A note on self-tuning tools. There are now programs available that you can buy to tune your car yourself. Many of these tools come with canned programs. Be careful as tuning a high output engine requires tremendous knowledge and experience to extract maximum power without damage.

Emissions legality: A note on down pipes (removing the catalyst). We have run back to back dyno runs with the cat on and off and the power gain is much smaller than most people claim. We all need to breathe the air. Its difficult to get your car its required emissions test without catalyst and it illegal.

High boost with stock engine: We have seen many damaged engines as result of making too much power with a stock engine. While modern engines are very reliable, it is easy to add large turbochargers and water methanol injection and break the engine. On the W205 C63S, maximum safe power on a stock engine is 800 LB/FT flywheel torque. CarBahn makes high performance engines designed to handle more power. More information is available on this web site.

About Steve Dinan: Steve Dinan has over 40 years of street car turbo experience. As an engine supplier we won 3 prototype racing championships and two overall wins at the 24hrs of Daytona partnering with Chip Ganassi Racing. No one know more about tuning high performance engines than Steve Dinan.

• Significantly Reduced Intake Air Temperatures for Maximum Performance
• 2 Row, 42mm Core (Dual Core) Featuring CSF Exclusive B-Tube Technology
• Core Features Ultra-Efficient, 6mm Tall Fins with a Multi-Louvered Design for Maximum Surface Area Contact
• Individually Leak and Pressure Tested
• CNC Machined Brackets and Fittings for Superb Fit and Durability
• Integrated All-Aluminum Race Style Bleeder Screw
• 1 Hour Mirror Finish Hand Polish
• Drop-in Fit Requires No Modifications to Install
• Includes Detachable Rock Guard

CarBahn Autoworks is proud to present the High-Performance Coil-Over Suspension System for the W205/A205/C205 C63 and C63S Sedan/Cabriolet/Coupe models.

Recommended Kits:

CarBahn highly recommends the use of Front Camber Adjuster Kit <https://carbahnautoworks.com/product/front-camber-adjuster-assembly-w205-c63-c63s/> with this coil over kit. Due to the lowered ride height of the C63, the vehicle tends to gain a large amount of negative camber causing inside shoulder of the tire to wear substantially quick. To solve this wear issue, CarBahn Autoworks has come with this solution that would get rid of the excessive camber without the undesirable squeaking and groaning noises that plague the products on the market today.

*Note: Due to the extensive lowering possible, and the increased suspension travel, the installer must carefully evaluate tire clearance under all situations. Safety will be compromised if all precautions are not taken. CarBahn is not responsible for any property damage or injury.

Estimated Installation Time:

11 hours (Includes ride height adjustment and alignment)

The stock rear toe link is built with rubber bushings and a curved forged alloy rod which can easily flex. During hard acceleration, this flex allows the rear wheels to have excessive toe changes. All this flex in the stock toe link causes the car to be unstable when pushing the limits of acceleration.

CarBahn eliminates this flex by replacing the rubber bushings with Teflon coated machined steel rod ends, and the OEM curved bar with a straight billet aluminum rod.

Most, if not all, of our competitors’ products wrap the rod end in a loose rubber boot, which not only allows water and debris to enter but also retains them which results in excessive noise and a short service life until the rod ends have to be replaced. The CarBahn rod ends are sealed perfectly against water and environmental contamination, thus providing a long, quiet, maintenance-free service life.

CarBahn is proud to announce the Caster Adjuster Assemblies for the C63S Mercedes-AMG models.

The CarBahn Caster Adjuster Assembly replaces the rubber bushings in the stock thrust arms with sealed precision ball joints inside machined aluminum housings. As a result of eliminating the deflection that is inherent in rubber bushings, braking stability is improved, and the tendency for the car to follow ruts in the road (especially with wider wheels and tires) is reduced. As an added benefit, the bearings are mounted eccentrically to give up to 2.1 degrees of adjustable caster range.

The bearings inside the Caster Adjuster are nylon-lined for quiet operation, and are sealed against water and debris intrusion for longevity.

Derived from our GTD1 racing wheel, the Forgeline GT1 5-Lug brings its racing DNA to the street. The GT1 5-Lug combines the latest in advanced wheel technology, including one piece forged monoblock construction, motorsport engineered design, I-beamed spokes, and I-beamed spoke spans to deliver head-turning good looks with track-ready capability.

The Forgeline GT1 5-Lug is a fully-forged one-piece monoblock wheel that is manufactured using technology similar to our very successful GA1R wheel. The GT1 5-Lug’s concave 10-spoke design includes extra long spokes that extend beyond the hidden lug holes while allowing plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is very lightweight, extremely stiff, and has excellent fatigue strength. The GT1 5-Lug is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, 21, and 22-inch diameters. (Please Note: Depending on size, the GT1 5-Lug may be available in deep, medium, or shallow concave profiles.) And just like any Forgeline wheel, the GT1 5-Lug is available with fully customizable finish options.

• • One-Piece Monoblock Construction
  • Concave Profile
  • 10-Spoke Design
  • Extended Spoke Length
  • Hidden Lug Holes
  • I-Beamed Spoke Technology
  • I-Beamed Spoke Spans Along the Lip
  • Very Lightweight
  • Generous Brake Clearance
  • Forged 6061-T6 Aluminum
  • Customizable Finish Options
  • Legendary Forgeline Quality and Customer Service

The Forgeline GA1R is a fully-forged one-piece monoblock wheel that utilizes much of the technology and design of our very successful GA3R racing wheel, including our “I-beamed” spoke technology. The concave design of the GA1R not only looks great, but allows plenty of room for caliper clearance and extreme brake fitment, while the one-piece monoblock forging and I-beamed spoke design yield a wheel that is extremely stiff with fatigue strength equal to our proven GA3R. And yet despite the strength and stiffness, for most applications and sizes, it also delivers a high-performance weight reduction – making it perfect for motorsports and racing applications or the discerning street enthusiast who demands the ultimate in performance capability!

The GA1R is designed for racing. It is engineered with a 2100 lb. street-tire load rating (per wheel) to ensure strength and integrity, even when subjected to the massive loads encountered on the stickiest race tires.

The GA1R is produced using our traditional forging method from 6061-T6 aluminum. It is currently available in 18, 19, 20, 21, and 22-inch sizes with a range of widths and offsets. (Please Note: Depending on size, the GA1R may be available in deep, medium, or shallow concave profiles. See sizing chart for details.) And just like any Forgeline wheel, the GA1R is available with fully customizable finish options.

The GA1R is also available for limited applications in Deep Cap (DC) and Extra Deep Cap (EDC) profiles. These Deep Cap profiles employ unique in-house lathe turnings that allow us to position the center cap deep within the center of the wheel and create an exaggerated extra-aggressive concave look. This option is an excellent choice for select vehicles including the BMW M3, Nissan GT-R, ZL1 Camaro, C6 Z06 Corvette (rear only), and certain Porsche models (rear only).

• • One-Piece Monoblock Design
  • Concave Profile
  • Deep Cap (DC) and Extra Deep Cap (EDC) Options Available for Select Applications
  • I-Beamed Spoke Technology
  • Extreme Stiffness
  • Extreme Fatigue Strength
  • 2100 lb. Street-Tire Load Rating (per wheel)
  • Lightweight
  • Generous Brake Clearance
  • Forged 6061-T6 Aluminum
  • Includes Standard Aluminum Center Cap
  • Customizable Finish Options
  • Legendary Forgeline Quality and Customer Service

The AR1 is an exciting evolution in Forgeline monoblock styling, with a very angular split spoke pattern, extra-deep concave profile, and radically-chamfered outer edge. The fully-forged Forgeline AR1 one piece monoblock wheel utilizes manufacturing technology similar to the very successful GA1R wheel. Beyond just beautiful style, the AR1 is engineered to allow plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging, computer-simulated FEA design process, and I-beam spoke technology yield a wheel that is lightweight, stiff, and has excellent fatigue strength.

The Forgeline AR1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the AR1 may be available in deep, medium, or shallow concave profiles.)

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline AR1 one piece monoblock wheel set starts at $6600.00 depending on size and finish. To purchase this wheel set, please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Derived from the GTD1 racing wheel, the Forgeline GT1 5-Lug one piece monoblock wheel brings its racing DNA to the street. The GT1 5-Lug combines the latest in advanced wheel technology, including one piece forged monoblock construction, motorsport engineered design, I-beamed spokes, and I-beamed spoke spans to deliver head-turning good looks with track-ready capability.

The GT1 5-Lug is a fully-forged one-piece monoblock wheel that is manufactured using technology similar to the very successful GA1R wheel. The GT1 5-Lug’s concave 10-spoke design includes extra long spokes that extend beyond the hidden lug holes while allowing plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is very lightweight, extremely stiff, and has excellent fatigue strength.

The Forgeline GT1 5-Lug one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters. (Please Note: Depending on size, the GT1 5-Lug may be available in deep, medium, or shallow concave profiles.)

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline GT1 5-Lug one piece monoblock wheel set starts at $8400.00 depending on size and finish. To purchase a wheel set with a finish option other than those available above, please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

The RB1 is a fully-forged wheel that utilizes manufacturing technology similar to the very successful GA1R wheel. The Forgeline RB1 one piece monoblock wheel features a concave 10-spoke design with a subtle directional twist on each spoke, so each set includes unique left and right versions. The RB1 also utilizes Forgeline’s I-beam technology along each spoke and along the front lip between spokes to reduce mass and enhance strength & rigidity. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, extremely stiff, and has excellent fatigue strength.

The Forgeline RB1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the RB1 may be available in deep, medium, or shallow concave profiles.)

The Forgeline one piece monoblock RB1 is also available for limited applications in Deep Cap (DC) and Extra Deep Cap (EDC) profiles. These Deep Cap profiles employ unique in-house lathe turnings that allow us to position the center cap deep within the center of the wheel and create an exaggerated extra-aggressive concave look. This option is an excellent choice for select vehicles including the BMW M3 and certain Porsche models (rear only)

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline RB1 one piece monoblock wheel set starts at $6200.00 depending on size and finish. To purchase this wheel set, please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Please note, images are for representational purposes only. Actual product may vary.

The Forgeline MT1 continues the exciting evolution in Forgeline monoblock styling. It features a ten spoke mesh design, unique deeply-cut diamonds machined into the base of each spoke around the center of the wheel, deep concave profile, and radically-chamfered outer edge. The MT1 is a fully-forged one-piece monoblock wheel that utilizes manufacturing technology similar to our very successful GA1R wheel. Beyond just beautiful style, the Forgeline MT1 one piece monoblock wheel is engineered to allow plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, stiff, and has excellent fatigue strength.

The Forgeline MT1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, and 21-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the MT1 may be available in deep, medium, or shallow concave profiles.) Like any Forgeline wheel, the MT1 is available with fully customizable finish options.

One-Piece Forged Monoblock Construction
Concave Profile
Ten Spoke Mesh Design
Unique Diamond Pattern Machined Into Each Spoke Base
Strong Chamfered Machining Details
Lightweight
Generous Brake Clearance
Forged 6061-T6 Aluminum
Includes Standard Aluminum Center Cap
Customizable Finish Options
Legendary Forgeline Quality

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline MT1 one piece monoblock wheel set starts at $8400.00 depending on size and finish. To purchase a wheel set with a finish option other than shown above, please please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Please note, images are for representational purposes only. Actual product may vary.

The VX1 continues the exciting evolution in Forgeline monoblock styling. It features a sharp Y-spoke design (with long spokes that wrap around the lug holes), striking sharp angles, deep concave profile, and radically-chamfered outer edge. The Forgeline VX1 is a fully-forged one-piece monoblock wheel that utilizes manufacturing technology similar to our very successful GA1R wheel. Beyond just beautiful style, the Forgeline VX1 one piece monoblock wheel is engineered to allow plenty of room for caliper clearance and extreme brake fitment. The one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is lightweight, stiff, and has excellent fatigue strength.

The Forgeline VX1 one piece monoblock wheel is machined from a single forging of 6061-T6 aluminum. It is currently available in 18, 19, 20, 21, and 22-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the VX1 may be available in deep, medium, or shallow concave profiles.)

One-Piece Forged Monoblock Construction
Concave Profile
Sharp Y-Spoke Design
Striking Sharp Angles
Strong Chamfered Machining Details
Lightweight
Generous Brake Clearance
Forged 6061-T6 Aluminum
Includes Standard Aluminum Center Cap
Customizable Finish Options
Legendary Forgeline Quality

And just like any Forgeline wheel, it is available with fully customizable finish options. Price for the Forgeline VX1 one piece monoblock wheel set starts at $8400.00 depending on size and finish. To purchase a wheel set with a finish option other than those available above, please please contact us.

Standard Finish:

Standard Silver Center, Hyper Silver Powder Coat, Gunmetal Center, Satin Gunmetal Center, Titanium Powder Coat, Graphite Powder Coat, Matte Graphite Powder Coat, Gloss Black, Satin Black, Matte Black, Gloss Bronze, Satin Bronze, Matte Bronze, Light Bronze Anodized Powder Coat, Medium Bronze Anodized Powder Coat, Race Gold Powder Coat, Matte Gold Powder Coat, Pearl Gray Powder Coat

Optional Finish:

Transparent Smoke, Transparent Copper, Transparent Red, Transparent Blue, Tinted Gold Transparent, Matte Transparent, Brushed Center, Fully Polished, Polished & Brushed, Diamond Cut Finish, HTM (High Tech Machined) Finish, Machined & Brushed, Custom Center Color, Black Chrome PVD

Please note, images are for representational purposes only. Actual product may vary.

Introducing the Carbahn License Plate Frame – the ultimate accessory to elevate your vehicle’s style and turn heads wherever you go. Crafted with premium materials and a sleek, modern design, this license plate frame is not just a functional necessity but a statement piece that tells other drivers that you have the best tuned car around.

Features:

• Premium Quality: Made from high-grade stainless steel, ensuring durability and a long-lasting shine that resists rust and corrosion.
• Sleek Design: Its minimalist, yet elegant design complements any car model, giving your vehicle a polished and sophisticated look.
• Easy Installation: Comes with all the necessary hardware for a quick and hassle-free installation, making it a perfect DIY project.
• Universal Fit: Designed to fit all standard US and Canadian license plates, ensuring compatibility with a wide range of vehicles.
• Customizable: Available in two finishes – matte black and brushed metal – so you can choose the one that best matches your car’s aesthetic.